LTC1435CS#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC1435 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 1.19V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 3.5V~30V |
| Control Features | Enable, Soft Start |
| Input Voltage (Min) | 3.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 2A |
| Frequency - Switching | Up to 400kHz |
| Input Voltage (Max) | 30V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Duty Cycle (Max) | 99% |
| Clock Sync | No |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
LTC1435CS#PBF Overview
With its 16-SOIC (0.154, 3.90mm Width) package, the switching controller fits the needs of most applications. dc motor controller is suitable for 1 output generation. Packaging for the pmic consists of Tube solid enclosures. There are Transistor Driver dc switching's output (s) that it can handle. Voltages 3.5V~30V are the dc control's supply voltage and operating voltage, respectively. Suitable for a 0°C~70°C TA dc switcher. In this switching controller, the switch can be set to Up to 400kHz. dc dc regulator can be generalized using Surface Mount. DCDC regulator is controlled efficiently by Enable, Soft Start. An analog IC SWITCHING CONTROLLER is connected to the switch converters. Thare switching converters has a terminal (s) at DUAL . 16 terminations with various dc switching's functions. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 15V. Other relevant dc to dc converter ics can be found by searching "LTC1435". Switching converter type is specifically Switching Regulator or Controllers. This dc dc voltage regulator should be powered by a voltage of 3.5V. DC regulator outputs 1.19V voltage according to the test statistics. The dc to dc regulator can only accept 30V input voltage. The output value is set to the greatest value of 2A.
LTC1435CS#PBF Features
Transistor Driver Outputs
Switching Frequency: Up to 400kHz
Enable, Soft Start
PULSE WIDTH MODULATION
LTC1435CS#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC1435CS#PBF DC to DC converter applications.
- Computed tomography (CT)
- Experimental setup
- Drilling machines
- Constant current circuits
- Sensitive electronic devices
- Electric heating, lighting
- Hydraulic presses
- Textile machinery
- PSRR circuits
- Thermal power
