LTC1435IG#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC1435 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 1.19V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 3.5V~30V |
| Control Features | Enable, Soft Start |
| Input Voltage (Min) | 3.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 2A |
| Frequency - Switching | Up to 400kHz |
| Input Voltage (Max) | 30V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Duty Cycle (Max) | 99% |
| Clock Sync | No |
| Height Seated (Max) | 2mm |
| Length | 6.7mm |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
LTC1435IG#PBF Overview
In the 16-SSOP (0.209, 5.30mm Width) package, the switching controller meets most application requirements. The dc motor controller is adquate to generate for 1 outputs. PMIC packaging is solid with a Tube enclosure. The program can handle Transistor Driver dc switching's outputs (s). DC control operates at 3.5V~30V volts and has 3.5V~30V supply voltage. Suitable for a -40°C~85°C TA dc switcher. There is a switch at Up to 400kHz that can be used with this controller. It is suitable for general dc dc regulator when it is set to Surface Mount. Featured in the dcdc regulator is Enable, Soft Start which allows efficient switching control. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. There are a terminal (s) on the switching converters that are designed at DUAL. An array of 16 terminations of dc switching. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. DC switcher's input voltageis 15V volts. A search for "LTC1435" will reveal other relevant dc to dc converter ics. Specially, switching converter corresponds to type Switching Regulator or Controllers. An input voltage of 3.5V is the minimum required for the dc dc voltage regulator. According to the test statistics, DC regulator outputs 1.19V voltage. Voltages 30V are the maximum that the dc to dc regulator will accept. Current is output to the greatest value of 2A.
LTC1435IG#PBF Features
Transistor Driver Outputs
Switching Frequency: Up to 400kHz
Enable, Soft Start
PULSE WIDTH MODULATION
LTC1435IG#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC1435IG#PBF DC to DC converter applications.
- Shearing machines
- Terrestrial set-top boxes
- Industrial robots
- Photovoltaic power
- Constant current circuits
- Geothermal power
- Planers
- Smoke exhaust equipment
- Grinders
- Game consoles
