LTC1436ACGN#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC1436 |
| JESD-30 Code | R-PDSO-G24 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 3.5V~30V |
| Control Features | Enable, Power on Reset, Soft Start |
| Input Voltage (Min) | 3.5V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Output Current-Max | 2A |
| Frequency - Switching | Up to 400kHz |
| Input Voltage (Max) | 36V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | SINGLE |
| Duty Cycle (Max) | 99% |
| Clock Sync | No |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
LTC1436ACGN#PBF Overview
Capsuled in the 24-SSOP (0.154, 3.90mm Width) package, the switching controller can be used for a wide range of applications. There is sufficient capacity to generate switching controller for outputs 1. PMIC packaging is solid with a Tube enclosure. Transistor Driver dc switching's outputs (s) can be handled by it. A 3.5V~30V voltage is supplied to the dc control and used for operating it. Suitable for working in an dc switcher that has a 0°C~70°C TA. There is a switch at Up to 400kHz that can be used with this controller. dc dc regulators can be carried out with Surface Mount. The dcdc regulator features Enable, Power on Reset, Soft Start for efficient switching control. SWITCHING CONTROLLER analog IC connects the switch converters. The switching converters's terminal (s) are designed at DUAL . An array of 24 terminations of dc switching. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. DC switcher's voltage input is 15V. In addition to "LTC1436", there are other relevant dc to dc converter ics you can find. Particularly, switching converter is a type of Switching Regulator or Controllers. Input voltage of dc dc voltage regulator should be 3.5V. Considering the dc to dc regulator can only accept 36V input voltage, it is important to take note of this. Whenever the current value is 2A, switching converter outputs the highest possible value.
LTC1436ACGN#PBF Features
Transistor Driver Outputs
Switching Frequency: Up to 400kHz
Enable, Power on Reset, Soft Start
PULSE WIDTH MODULATION
LTC1436ACGN#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC1436ACGN#PBF DC to DC converter applications.
- Lathes
- Production lines
- Balance equipment
- Linear guide
- Scientific testing
- Low output voltage switching power supply circuits
- Magnetohydrodynamic power
- Mobile phones
- Network technology
- SMT equipment
