LTC1436AEGN#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC1436 |
| JESD-30 Code | R-PDSO-G24 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 3.5V~30V |
| Control Features | Enable, Power on Reset, Soft Start |
| Input Voltage (Min) | 3.6V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 2A |
| Frequency - Switching | Up to 400kHz |
| Input Voltage (Max) | 36V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Duty Cycle (Max) | 99% |
| Clock Sync | No |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
LTC1436AEGN#PBF Overview
With a 24-SSOP (0.154, 3.90mm Width) package, the switching controller is suitable for a wide range of applications. 1 outputs are supported by the dc motor controller. An enclosure of Tube is used to package the PMIC. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sThis dc control has a supply voltage and operating voltage of 3.5V~30V. Suitable for working in an dc switcher that has a -40°C~85°C TA. Using this switching controller, it is possible to switch at Up to 400kHz. Surface Mount makes it suitable for general dc dc regulator. Featured in the dcdc regulator is Enable, Power on Reset, Soft Start which allows efficient switching control. The switch converters are connected to a SWITCHING CONTROLLER analog IC. There are a terminal (s) on the switching converters that are designed at DUAL. There are many different types of terminations for 24. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. DC switcher's voltage input of 15V. You can find other relevant dc to dc converter ics by searching "LTC1436". In particular, switching converter is a type of Switching Regulator or Controllers. An input voltage of 3.6V is the minimum required for the dc dc voltage regulator. The test statistics indicate that DC regulator outputs a voltage of 5V. Voltages 36V are the maximum that the dc to dc regulator will accept. Switching converter outputs current to the greatest value of 2A.
LTC1436AEGN#PBF Features
Transistor Driver Outputs
Switching Frequency: Up to 400kHz
Enable, Power on Reset, Soft Start
PULSE WIDTH MODULATION
LTC1436AEGN#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC1436AEGN#PBF DC to DC converter applications.
- Surge protection circuits
- Pipe bending machines
- Bending machines
- Post equipment
- Remotely powered electric motors
- Domestic water pumps
- Machining centers
- Electrical power transmission
- Automation technology
- Electrical distribution systems
