LTC1436AIGN-PLL#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC1436 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | 3.5V~30V |
| Control Features | Enable, Power on Reset, Soft Start |
| Input Voltage (Min) | 3.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 400kHz |
| Input Voltage (Max) | 30V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 138kHz |
| Duty Cycle (Max) | 99% |
| Clock Sync | No |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC1436AIGN-PLL#PBF Overview
With a 24-SSOP (0.154, 3.90mm Width) package, the switching controller is suitable for a wide range of applications. This dc motor controller can be used to generate outputs with 1 numbers. Tube solid enclosure protects the pmic. The program can handle Transistor Driver dc switching's outputs (s). A 3.5V~30V voltage is supplied to the dc control and used for operating it. Qualified to work in a -40°C~85°C TA dc switcher. A switching controller such as this can switch at a value of Up to 400kHz . dc dc regulators can be carried out with Surface Mount. In order to control switching efficiently, the dcdc regulator features Enable, Power on Reset, Soft Start. An analog IC SWITCHING CONTROLLER is connected to the switch converters. The switching converters's terminal (s) are designed at DUAL . A variety of dc switching's functions can be performed on 24 terminations. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 15V. Searching "LTC1436" will return other relevant dc to dc converter ics. Total pins of switching converter are 24. In particular, switching converter belongs to the Switching Regulator or Controllers family. An input voltage of 3.5V is the minimum required for the dc dc voltage regulator. It should be fully noted that the dc to dc regulator only accepts 30V input voltage at most. A starting point for a project is to note down the dc dc regulator's usual output current, which is 2A. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. This dc regulatorhas a max frequency of 138kHz.
LTC1436AIGN-PLL#PBF Features
Transistor Driver Outputs
Switching Frequency: Up to 400kHz
Enable, Power on Reset, Soft Start
PULSE WIDTH MODULATION
LTC1436AIGN-PLL#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC1436AIGN-PLL#PBF DC to DC converter applications.
- Smoke exhaust equipment
- Experimental setup
- Product testing
- Production lines
- Geothermal power
- Laboratories
- Digital display device
- Pipe bending machines
- seismic instrument power circuits
- Large fire protection systems
