LTC1438IG-ADJ#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC1438 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 9V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | 3.5V~30V |
| Control Features | Enable, Power on Reset, Soft Start |
| Topology | Buck |
| Min Input Voltage | 3.5V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 400kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 138kHz |
| Duty Cycle (Max) | 99% |
| Clock Sync | No |
| Output Phases | 1 |
| Height | -50μm |
| Length | 10.5mm |
| Width | 5.7mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC1438IG-ADJ#PBF Overview
As a result of 28-SSOP (0.209, 5.30mm Width) compact design, the switching controller is compatible with most applications. dc motor controller is suitable for 2 output generation. Tube solid enclosure protects the pmic. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching's3.5V~30V is the supply voltage and the operating voltage of the dc control. Suitable for a -40°C~85°C TA dc switcher. This switching controller can switch at Up to 400kHz. Surface Mount makes it suitable for general dc dc regulator. For efficient switching control, the dcdc regulator features Enable, Power on Reset, Soft Start. The switch converters are connected to a DUAL SWITCHING CONTROLLER analog IC. DUAL are the position of the terminal of the switching converters. Different dc switching's functions can be applied to 28 terminations. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 15V. You can find other relevant dc to dc converter ics by searching "LTC1438". Switching converter has a total of 28 pins. Switching converter type is specifically Switching Regulator or Controllers. Statistically, DC regulator outputs 9V volts. In most cases, the dc dc regulator's output current is 2A. This information should be noted when you begin working with the component. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. 138kHz is the maximum frequency of this dc regulators. Switching controller is necessary to have a supply voltage of 3.5V.
LTC1438IG-ADJ#PBF Features
Transistor Driver Outputs
Switching Frequency: Up to 400kHz
Enable, Power on Reset, Soft Start
PULSE WIDTH MODULATION
LTC1438IG-ADJ#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC1438IG-ADJ#PBF DC to DC converter applications.
- Printing equipment
- Correction machines
- Gear/thread machining machines
- Lathes
- Solar power plants
- Electric heating, lighting
- Ball screw pair
- Digital precision reference circuits
- Wide-range voltage regulation circuits
- Network technology
