LTC1440IMS8#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 1999 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC1440 |
| Pin Count | 8 |
| JESD-30 Code | S-PDSO-G8 |
| Qualification Status | Not Qualified |
| Output Type | CMOS, TTL |
| Number of Elements | 1 |
| Supply Current-Max | 0.0044mA |
| Response Time | 14000 ns |
| Voltage - Supply, Single/Dual (±) | 2V~11V ±1V~5.5V |
| Neg Supply Voltage-Max (Vsup) | -0.3V |
| Current - Quiescent (Max) | 4.4μA |
| Voltage - Input Offset (Max) | 10mV @ 5V |
| Hysteresis | 50mV |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Current - Output (Typ) | 40mA |
| Propagation Delay (Max) | 15μs |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
LTC1440IMS8#TRPBF Overview
Electronic comparator is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) for convenient transportation.There is a comparator of type CMOS, TTL output on this device.As a result, it is designed with Tape & Reel (TR) package.Electronic comparator is possible to find the 8 terminals of the comparator.Electronic comparator is a component of the Comparator family.With a voltage of 3V supplied, the comparator is capable of performing a wide range of demanding tasks.In general, the chip type can be classified as with Voltage Reference .In total, it contains 1 elements.As a result, it contains 8 pins.The recommended mounting method is Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~85°C in order to prevent malfunctions.You can find more pin-to-pin solutions by searching LTC1440 .This part can be supplied with a maimum current of 0.0044mA .
LTC1440IMS8#TRPBF Features
CMOS, TTL output capability
with Voltage Reference IC
Employing 1 elements
Operates under -40°C~85°C
LTC1440IMS8#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC1440IMS8#TRPBF linear comparators applications.
- System control and monitoring
- Consumer Medical Electronics
- Appliances
- General-Purpose, Low-Voltage Applications
- Battery management and protection
- Wide Range VCO; MOS Clock Timers
- Handheld Instruments
- Analog front end
- General-Purpose Portable Devices
- Set Top Boxes
