LTC1444CS#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Max Power Dissipation | 500mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC1444 |
| Pin Count | 16 |
| Output Type | CMOS, Open-Drain, TTL |
| Operating Supply Voltage | 3V |
| Number of Elements | 4 |
| Power Supplies | 3/5V |
| Power Dissipation | 500mW |
| Output Current | 15μA |
| Propagation Delay | 12 μs |
| Quiescent Current | 8.5μA |
| Supply Current-Max | 0.009mA |
| Response Time | 14000 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2V~11V ±1V~5.5V |
| Input Offset Voltage (Vos) | 3mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 12V |
| Dual Supply Voltage | 3V |
| Current - Quiescent (Max) | 8.5μA |
| Voltage - Input Offset (Max) | 10mV @ 5V |
| Hysteresis | 50mV |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Current - Output (Typ) | 0.015mA @ 5V |
| Height | 1.5mm |
| Length | 10.01mm |
| Width | 3.99mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC1444CS#PBF Overview
For convenience, it is packaged in 16-SOIC (0.154, 3.90mm Width) .A comparator with an output type of CMOS, Open-Drain, TTL is being used.Ready for shipping in Tube package.The comparator has a total of 16 terminals.Electronic comparator is a component of the Comparator family.A comparator is capable of completing a variety of demanding tasks when supplied with 3V voltage.This is a typical comparator of type with Voltage Reference .A total of 4 elements can be found in it.A total of 16 pins are included.The type of mounting recommended is Surface Mount .A temperature setting of 0°C~70°C should be used for the operating temperature in order to prevent malfunctions.16 pins are present on the comparator.Alternatively, you may search for LTC1444 to find more pin-to-pin solutions for your specific needs.A quiescent current of 8.5μA is displayed by this comparator.The device can be run with 3/5V power supplies.The maximum current that can be supplied to this part is 0.009mA .A normal operation requires a voltage of 3V .
LTC1444CS#PBF Features
CMOS, Open-Drain, TTL output capability
with Voltage Reference IC
Employing 4 elements
Operates under 0°C~70°C
Quiescent Current: 8.5μA
LTC1444CS#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC1444CS#PBF linear comparators applications.
- Automotive
- Factory automation & control
- Mobile Phones and Tablets
- Security Detection Systems
- Window Comparators
- General-Purpose Portable Devices
- Body Control Modules
- Battery management and protection
- Battery-Powered Electronics
- Consumer Medical Electronics
