LTC1470CS8#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Feature | Slew Rate Controlled |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | 4.75V TO 5.25V OPERATION IS ALSO POSSIBLE |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC1470 |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.35V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | On/Off |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Current - Output (Max) | 1A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Switch Type | PCMCIA Switch |
| Supply Current-Max (Isup) | 0.2mA |
| Ratio - Input:Output | 2:1 |
| Voltage - Load | 3.3V 5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 140m Ω |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
LTC1470CS8#TRPBF Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).There is a 8-SOIC (0.154, 3.90mm Width) package that includes it.This lighting drivere has a mounting type of Surface Mount.It owns the PCMCIA Switch switch type.In order to guarantee reliable performance, the temperature should be set to 0°C~70°C TA.The lighting driver is equipped with 1 outputs that can be used.The LED driving board is powered by a voltage of Not Required.The maximum output voltage is N-Channel volts.A lighting driver with Slew Rate Controlled features is available.It belongs to the family LTC1470.It consists of 8 terminations in total.It is important to note that the LED driving board has 1 functions.This LED driver has a maximum output of 1AV.As long as the supply voltage is 3.3V, high efficiency can be achieved.There are 8 pins in total on this board.Self-contained LED driver with Power Management Circuits capacity in an econtainer.A maximum supply voltage of 3.6V is set in Vsup.Normal operation requires Vsup above 2.7V.In this case, the analog IC in this gadget is ANALOG CIRCUIT.A 3.35V power supply is used by the part.The LED driver can also be used to produce 4.75V TO 5.25V OPERATION IS ALSO POSSIBLE.In order to operate, it requires at most 0.2mA amps of supply current.
LTC1470CS8#TRPBF Features
Supplied from 3.3V
Additional features like 4.75V TO 5.25V OPERATION IS ALSO POSSIBLE
LTC1470CS8#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC1470CS8#TRPBF Power Switches ICs applications.
- Storage (HDDs, SSDs)
- USB Protection
- Hard Disk Drives
- Handheld Devices
- Solid State Drivers
- PDAs
- Mobile Communication Devices
- Notebook PC
- Set-top-box
- Set-Top Boxes
