banner_page

LTC1470ES8#PBF

3.35V N-Channel PMIC LTC1470 8 Pin 5V 8-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Linear Technology/Analog Devices
  • Nocochips NO: 471-LTC1470ES8#PBF
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 924
  • Description: 3.35V N-Channel PMIC LTC1470 8 Pin 5V 8-SOIC (0.154, 3.90mm Width) (Kg)

Details

Tags

Parameters
Lifecycle Status PRODUCTION (Last Updated: 3 weeks ago)
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Surface Mount YES
Number of Pins 8
Operating Temperature -40°C~85°C TA
Packaging Tube
Published 2005
JESD-609 Code e3
Feature Slew Rate Controlled
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Matte Tin (Sn)
Subcategory Power Management Circuits
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number LTC1470
Pin Count 8
Number of Outputs 1
Output Voltage 7V
Output Type N-Channel
Power Supplies 3.35V
Supply Voltage-Min (Vsup) 4.75V
Number of Channels 2
Interface On/Off
Analog IC - Other Type ANALOG CIRCUIT
Current - Output (Max) 1A
Output Configuration High Side
Voltage - Supply (Vcc/Vdd) Not Required
Switch Type PCMCIA Switch
Ratio - Input:Output 2:1
Voltage - Load 3.3V 5V
Fault Protection Current Limiting (Fixed), Over Temperature
Rds On (Typ) 140m Ω
Length 5mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week

LTC1470ES8#PBF Overview


As you can see, it's packaged in the way of a Tube.There is a 8-SOIC (0.154, 3.90mm Width) package that includes it.Surface Mount is the mounting type of the LED driver.PCMCIA Switch is the switch type it owns.It is recommended that the temperature be set to -40°C~85°C TA for reliable operation.The LED driver has a total of 1 outputs.Operation is based on Not Required supply voltage.The maximum output voltage is N-Channel volts.This LED driving board is equipped with Slew Rate Controlled features in order for it to be useful.I believe it belongs to the LTC1470 family.As a result, there are 8 terminations.It is necessary to use the 8 pins in order to operate the LED driver.As far as the lighting driver is concerned, there are 1 functions.There is a maximum output of 1AV from the LED driver.As long as the supply voltage is 5V, high efficiency can be achieved.As a result, it has a total of 8 pins.The LED driver is packaged in an econtainer with a capacity of Power Management Circuits.Normal operation requires a voltage above 4.75V for the supply voltage.In this case, the analog IC in this gadget is ANALOG CIRCUIT.You can select from 2 channels.In this case, the power supply is 3.35V.

LTC1470ES8#PBF Features


Supplied from 5V
2 channels

LTC1470ES8#PBF Applications


There are a lot of Linear Technology/Analog Devices LTC1470ES8#PBF Power Switches ICs applications.

  • Hot-Swap Systems
  • Hot Swaps
  • USB3.1 Power Delivery
  • Portable GPS
  • Portable Devices
  • Set-top-box
  • Solid State Drivers
  • PDAs
  • Low Voltage I/O System Power
  • Portable Music Players

Write a review

Note: HTML is not translated!
    Bad           Good