LTC1470ES8#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Feature | Slew Rate Controlled |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC1470 |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 3.35V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Interface | On/Off |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Current - Output (Max) | 1A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Switch Type | PCMCIA Switch |
| Supply Current-Max (Isup) | 0.2mA |
| Ratio - Input:Output | 2:1 |
| Voltage - Load | 3.3V 5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 140m Ω |
| Length | 4.9025mm |
| Width | 3.899mm |
| RoHS Status | ROHS3 Compliant |
LTC1470ES8#TRPBF Overview
A Tape & Reel (TR) is used to package it.It's included in the 8-SOIC (0.154, 3.90mm Width) package.Mounting type Surface Mount is selected for the LED driving board.There is a PCMCIA Switch switch type associated with it.It is best to set the temperature to -40°C~85°C TA to ensure reliable operation.The LED driver is equipped with 1 outputs.With a supply voltage of Not Required, the LED driving board operates.There is a maximum output voltage of N-Channel volts on this LED driver.It is equipped with Slew Rate Controlled features.It belongs to the family LTC1470.A total of 8 terminations can be found in it.There are 1 functions of the LED driver.The lighting driver's maximum output is 1AV.It is possible to achieve a high level of efficiency with a supply voltage of 5V.As a result, it has a total of 8 pins.There is a Power Management Circuits capacity container for this LED driver that is self-contained.The Vsup value (maximum supply voltage) is set to 5.25V.For normal operation, the supply voltage (Vsup) should be kept above 4.75V.In this case, the analog IC in this gadget is ANALOG CIRCUIT.It has a power supply of 3.35V.0.2mA is the maximum operating current.
LTC1470ES8#TRPBF Features
Supplied from 5V
LTC1470ES8#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC1470ES8#TRPBF Power Switches ICs applications.
- Solid-State Drives
- Gaming
- HDD and SSD
- Portable GPS
- Telecom and Network Systems
- PC Card Hot Swap
- Portable Devices
- USB Power Distribution
- USB Ports/Hubs
- Hard Disk Drives
