LTC1471CS#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Feature | Slew Rate Controlled |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | 5V OPERATION IS ALSO POSSIBLE |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC1471 |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Interface | On/Off |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Current - Output (Max) | 1A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Switch Type | PCMCIA Switch |
| Ratio - Input:Output | 2:1 |
| Voltage - Load | 3.3V 5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 140m Ω |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
LTC1471CS#PBF Overview
As a result, it is packaged in the form of a Tube.There is a package for it in the 16-SOIC (0.154, 3.90mm Width) package.Mounting type Surface Mount is selected for the LED driving board.There is a PCMCIA Switch switch type associated with it.It is recommended that the temperature be set to 0°C~70°C TA for reliable performance.The LED driver has a total of 2 outputs.To operate, it needs a supply voltage of Not Required.A maximum output voltage of N-Channel volts can be obtained with this LED driver.There are Slew Rate Controlled features available on the LED driving board.I believe it belongs to the LTC1471 family.A total of 16 terminations have been found in it.There are 2 functions of the LED driver.From the lighting driver, there is a maximum output of 1AV.With a supply voltage of 5V, high efficiency is possible.A total of 16 pins are present on it.It is self-contained in an econtainer with a capacity of Power Management Circuits.In order to operate normally, the supply voltage (Vsup) must be maintained above 4.75V.The gadget uses an analog IC, which is ANALOG CIRCUIT in this case.There is a voltage supply of 5V volts on this part.This LED driver can also produce 5V OPERATION IS ALSO POSSIBLE.
LTC1471CS#PBF Features
Supplied from 5V
Additional features like 5V OPERATION IS ALSO POSSIBLE
LTC1471CS#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC1471CS#PBF Power Switches ICs applications.
- Notebook PC
- Hot Swap
- Hot-Swap Systems
- Various applications equipped with buttons
- Portable/Handheld Devices
- Portable GPS
- USB Protection
- HDD, SSD
- HDD and SSD
- Gaming
