LTC1472CS#PBF
| Parameters | |
|---|---|
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC1472 |
| Pin Count | 16 |
| Number of Outputs | 2 |
| Output Voltage | 7V |
| Max Output Current | 1A |
| Power Supplies | 5V |
| Number of Channels | 2 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | 4.5V~5.5V |
| Adjustable Threshold | NO |
| Switch Type | PCMCIA Switch |
| Nominal Input Voltage | 5.25V |
| Ratio - Input:Output | 2:1 |
| Voltage - Load | 0V~12.6V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 140m Ω |
| Height Seated (Max) | 1.75mm |
| Length | 10.01mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Feature | Slew Rate Controlled |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 140mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ADDITIONAL 3 TO 5.5 VCC SUPPLY REQUIRED |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
LTC1472CS#PBF Overview
Tube is how it's packaged.The 16-SOIC (0.154, 3.90mm Width) package includes it.This LED driving board is mounted using the mounting type Surface Mount.PCMCIA Switch is the type of switch owned by it.It is recommended that the temperature be set to 0°C~70°C TA for reliable performance.In this LED driver, there are no outputs available.A voltage of 4.5V~5.5V is used to power it.It is equipped with Slew Rate Controlled features.The LTC1472 family contains this object.The termination count is 16.In order to operate, the 16 pins are used.It consists of 1 functions.The maximum output current must drop to 1A to meet the operation criteria.The supply voltage can be 12V for high efficiency.The LED driving board is equipped with a total of 16 pins.The LED driver has 140mOhm resistance.There is a Power Management Circuits capacity container for this LED driver that is self-contained.In this lighting driver, POWER SUPPLY SUPPORT CIRCUIT is the analog IC.There are a total of 2 available channels.In this case, the power supply is 5V.By using this lighting driver, it is also possible to produce ADDITIONAL 3 TO 5.5 VCC SUPPLY REQUIRED.
LTC1472CS#PBF Features
Supplied from 12V
Resistance of 140mOhm
2 channels
Additional features like ADDITIONAL 3 TO 5.5 VCC SUPPLY REQUIRED
LTC1472CS#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC1472CS#PBF Power Switches ICs applications.
- Smart Phones, Feature Phones
- Portable GPS Device
- Hot Swap
- Hard Disk Drives
- USB3.1 Power Delivery
- Portable/Handheld Devices
- Portable Video Game Players
- Solid-State Drives
- Set-top-box
- Mobile Communication Devices
