LTC1472CS#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Feature | Slew Rate Controlled |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ADDITIONAL 3 TO 5.5 VCC SUPPLY REQUIRED |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC1472 |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Number of Channels | 2 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 1A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | 4.5V~5.5V |
| Adjustable Threshold | NO |
| Switch Type | PCMCIA Switch |
| Ratio - Input:Output | 2:1 |
| Voltage - Load | 0V~12.6V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 140m Ω |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
LTC1472CS#TRPBF Overview
It is package in Tape & Reel (TR) case.In the 16-SOIC (0.154, 3.90mm Width) package, it is included.The lighting driver has the mounting type Surface Mount.There is a PCMCIA Switch switch type associated with it.Keeping the temperature at 0°C~70°C TA ensures reliable operation.There are 2 outputs available on this lighting driver.To operate, it needs a supply voltage of 4.5V~5.5V.In terms of features, the LED driving board has Slew Rate Controlled.This object belongs to the LTC1472 family.It has a total of 16 terminations.It is important to note that the LED driving board has 1 functions.In this case, the LED driving board can produce only 1AV as its maximum output.It is possible to obtain high efficiency with a supply voltage of 12V.This LED driver is equipped with a total of 16 pins.A self-contained econtainer holding Power Management Circuits capacity contains this lighting driver.This gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.In total, there are 2 channels available.A 5V power supply is used by the part.With this LED driver, ADDITIONAL 3 TO 5.5 VCC SUPPLY REQUIRED can also be produced.
LTC1472CS#TRPBF Features
Supplied from 12V
2 channels
Additional features like ADDITIONAL 3 TO 5.5 VCC SUPPLY REQUIRED
LTC1472CS#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC1472CS#TRPBF Power Switches ICs applications.
- Portable Video Game Players
- Storage (HDDs, SSDs)
- Portable Music Players
- Storage Drives
- Hot Swaps
- Handheld Devices
- Low Voltage I/O System Power
- Hot Swap
- USB Ports/Hubs
- Solid State Drivers
