LTC1473LCGN#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 1999 |
| Series | PowerPath™ |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Source Selector Switch |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Handheld/Mobile Devices |
| HTS Code | 8542.39.00.01 |
| Technology | CMOS |
| Voltage - Supply | 2.8V~9V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC1473 |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Supply Voltage-Max (Vsup) | 9V |
| Supply Voltage-Min (Vsup) | 2.8V |
| Number of Channels | 2 |
| Adjustable Threshold | NO |
| Current - Supply | 100μA |
| FET Type | N-Channel |
| Ratio - Input:Output | 3:1 |
| Internal Switch(s) | No |
| Delay Time - OFF | 1μs |
| Delay Time - ON | 22μs |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9116mm |
| RoHS Status | ROHS3 Compliant |
LTC1473LCGN#TRPBF Overview
There is a 16-SSOP (0.154, 3.90mm Width) case that comes with it. As a result, it is suitable for packing the part in the Tape & Reel (TR) case. The part is mounted in the way of Surface Mount. There is a voltage of 2.8V~9V applied to it. This component's minimum operating temperature must not be 0°C~70°C. There is a perfect fit between it and the component connected in Handheld/Mobile Devices. Source Selector Switch is the category for the device. There is a N-Channel type of FET. In this part, there are 16 terminations. The device is designed with 16 pins. LTC1473 is the base of this part. 5V provides its performance. The peak reflow temperature of this part is used to run 260 on it. The purpose of this is to make sure that the supply current for the component at 100μA is running as it should be. For this part, Vsup cannot be less than 2.8V. 9V represents the maximum supply voltage (Vsup). In this case, we are dealing with a device from the PowerPath? series.
LTC1473LCGN#TRPBF Features
in a 16-SSOP (0.154, 3.90mm Width) case
FET Type: N-Channel
16 terminations
Peak Reflow Temperature (Cel) : 260
LTC1473LCGN#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC1473LCGN#TRPBF Ideal Diode controller applications.
- AC Rectifier
- PCs
- Cell phones
- Automotive battery protection
- MP3 Players
- Modems
- Industrial transport
- Industrial motor drives
- Alternator
- Electronic point of sale
