LTC1480CS8#TRPBF
| Parameters | |
|---|---|
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Nominal Supply Current | 600μA |
| Data Rate | 150KBd |
| Differential Output | YES |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Half |
| Receiver Hysteresis | 40mV |
| Receive Delay-Max | 200 ns |
| Output Low Current-Max | 0.004A |
| High Level Input Current-Max | 0.000002A |
| Number of Transmitters | 1 |
| Length | 4.9025mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC1480 |
| Pin Count | 8 |
LTC1480CS8#TRPBF Overview
LED drivers with the enhanced 8-SOIC (0.154, 3.90mm Width) package will be able to drive a variety of common LEDs with ease.Tape & Reel (TR) package is used to mount this receiver.This Transceiver can transceiver is a versatile part that has enabled many solutions to serve a variety of purposes.PCB or development board with Surface Mount-type connectors can accommodate this wide receiver.Power supply for this differential driver is 3V~3.6V.This electronic part can have?up to 1/1 eligible receivers/drivers on the field at once.?Applications with operating temperatures of 0°C~70°C have been designed primarily for this ic receiver.Driver ICs in this category can operate efficiently with a supply voltage range of 3.3V.In this package, you will find 8 market-standard pinouts for this transceiver.Since the base part number LTC1480 uniquely identifies the product type, temperature, package, etc., you can use it to find more variations.This is a 8-pin driver IC with enhanced power dissipation control.As a result of optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size has been greatly reduced.In terms of resolution, this ic receiver was capable of providing a 1-bit resolution.As a rule of thumb, this receiver is typically specified with a resolution of 1 bits.There is a supply voltage of 3.3V on the input of this transceiver module, so it can be operated from that source.There is a subcategory named Line Driver or Receivers for this rf transceiver module.Using an antenna, there are 1 transmitters, which produce radio waves in order to transmit or send data.
LTC1480CS8#TRPBF Features
Tape & Reel (TR) package
8 pin count
8 pins
LTC1480CS8#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC1480CS8#TRPBF Drivers/Receivers/Transceivers applications.
- Fiber optic cable connection network
- Notebook
- Aircraft navigation
- Carrier phase observations
- Laser diode bonding
- Fast Ethernet
- Mainframes, workstations or storage devices
- Data center
- Televisions
- Wireless network systems
