LTC1538CG-AUX#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC1538 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 9V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | 3.5V~30V |
| Control Features | Enable, Power on Reset, Soft Start |
| Input Voltage (Min) | 3.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 400kHz |
| Input Voltage (Max) | 36V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 138kHz |
| Duty Cycle (Max) | 99% |
| Clock Sync | No |
| Output Phases | 1 |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC1538CG-AUX#PBF Overview
In the 28-SSOP (0.209, 5.30mm Width) package, the switching controller meets most application requirements. 2 outputs can be generated with the dc motor controller. PMIC is packaged in a solid enclosure of Tube. The system can process Transistor Driver dc switching's outputs (s). 3.5V~30V is the operating voltage and supply voltage of the dc control. Suitable for working in an dc switcher that has a 0°C~70°C TA. This switching controller can switch at Up to 400kHz. A generalization of dc dc regulator can be made using Surface Mount. DCDC regulator is controlled efficiently by Enable, Power on Reset, Soft Start. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. Switching converters are designed with the terminal (s) at position DUAL . An array of 28 terminations of dc switching. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 15V. Searching "LTC1538" will return other relevant dc to dc converter ics. Pins number 28 of switching converter in total. Switching converter is a special type of Switching Regulator or Controllers. Input voltage of dc dc voltage regulator should be 3.5V. As determined by the test statistics, the output voltage of DC regulator is 9V. At most, the dc to dc regulator accepts 36V input voltage. If you start a project, note down the dc dc regulator's usual output current of 2A. This Surface Mount makes DC switcher suitable for most prototypes and applications. There is a maximum frequency of 138kHz on this dc regulators.
LTC1538CG-AUX#PBF Features
Transistor Driver Outputs
Switching Frequency: Up to 400kHz
Enable, Power on Reset, Soft Start
PULSE WIDTH MODULATION
LTC1538CG-AUX#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC1538CG-AUX#PBF DC to DC converter applications.
- Special machining machine tools
- Mobile phones
- Hydro power
- Network technology
- SMT equipment
- USB circuits
- Hydrogen power
- Laboratories
- Automatic plug-in machines
- Computed tomography (CT)
