LTC1604ACG#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 36-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 36 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 36 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Analog to Digital Converters |
| Max Power Dissipation | 350mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC1604 |
| Pin Count | 36 |
| Qualification Status | Not Qualified |
| Polarity | Bipolar |
| Configuration | S/H-ADC |
| Power Dissipation | 350mW |
| Number of Bits | 16 |
| Input Type | Differential, Single Ended |
| Architecture | SAR |
| Converter Type | ADC, SUCCESSIVE APPROXIMATION |
| Supply Type | Dual |
| Reference Type | External, Internal |
| Data Interface | Parallel |
| Resolution | 2 B |
| Sampling Rate | 333 ksps |
| Voltage - Supply, Analog | ±5V |
| Number of Analog In Channels | 1 |
| Sampling Rate (Per Second) | 333k |
| Max Dual Supply Voltage | 5.25V |
| Output Bit Code | BINARY |
| Integral Nonlinearity (INL) | 2 LSB |
| Min Dual Supply Voltage | 4.75V |
| Sample and Hold / Track and Hold | SAMPLE |
| Dual Supply Voltage | 5V |
| Number of Converters | 1 |
| Ratio - S/H:ADC | 1:1 |
| Signal to Noise Ratio (SNR) | 90 dB |
| Negative Supply Voltage-Nom | -5V |
| Conversion Time-Max | 2.8μs |
| Height | -50μm |
| Length | 13.1mm |
| Width | 5.6mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC1604ACG#PBF Overview
The analogue to digital converter is designed with 16 Bits.The AD converter is embedded in the 36-SSOP (0.209, 5.30mm Width) package.The ADC converter is packaged in the way of Tube.The ADC converter is equipped with 1 Functions .There are 36 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 5V.The A/D converter has 1 channels.The is equipped with 36 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, SUCCESSIVE APPROXIMATION converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at 0°C~70°C.The number of samples of audio recorded every second is 333k Hz.The input type of this electronic AD converter is Differential, Single Ended.There are External, Internal reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for SAMPLE time.The architecture that analogue to digital converter's core adopts is SAR.There are 36 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is ±5V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 2 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to LTC1604 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.There are several types of supply that can be categorized according to Dual.ADC converters can be mounted using Surface Mount.As an undesirable derivative of its primary action, The heat (energy loss or waste) that this electronic or electrical digital converter produces is 350mW. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 350mW.There are 1 converters, which will convert numbers to words and figures to words. The dual supply type of this electronic AD converter is 5V.It operates with the maximal dual supply voltage of 5.25V.It operates with the minimal dual supply voltage of 4.75V.
LTC1604ACG#PBF Features
1 Functions
36 basic kinds of terminations
36 pin count
LTC1604ACG#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC1604ACG#PBF ADC applications.
- TD-SCDMA, WiMAX
- Digital beam-forming systems for ultrasound
- Communication Systems
- Scientific instruments
- Instrumentation and test equipment
- Displaying
- Microcontrollers.
- Transducer
- Medical Instrumentation and medical imaging
- Scientific instruments.
