LTC1624IS8#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1998 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC1624 |
| Function | Step-Up, Step-Down, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 30V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive or Negative |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | 3.5V~36V |
| Control Features | Enable |
| Input Voltage (Min) | 3.5V |
| Topology | Buck, Boost, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz |
| Input Voltage (Max) | 36V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Max Frequency | 225kHz |
| Duty Cycle (Max) | 95% |
| Length | 4.9025mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC1624IS8#TRPBF Overview
It comes in the 8-SOIC (0.154, 3.90mm Width) package, which makes switching controller suitable for most applications. There is sufficient capacity to generate switching controller for outputs 1. A solid enclosure of Tape & Reel (TR) surrounds pmic. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sA 3.5V~36V voltage is supplied to the dc control and used for operating it. Work well in dc switchers with a -40°C~85°C TA. The switching controller can be switched at 200kHz. A generalization of dc dc regulator can be made using Surface Mount. The dcdc regulator features Enable for efficient switching control. A SWITCHING CONTROLLER analog IC is connected to the switch converters. Terminal (s) of the switching converters are designed at the DUAL position. Different dc switching's functions can be applied to 8 terminations. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. It is inputted with a DC switcher's voltage of 15V. You can find other relevant dc to dc converter ics by searching "LTC1624". There are 8 pins on switching converter. In particular, switching converter is a type of Switching Regulator or Controllers. The minimum input voltage of the dc dc voltage regulator should be 3.5V. The test statistics indicate that DC regulator outputs a voltage of 30V. Voltages 36V are the maximum that the dc to dc regulator will accept. In most cases, the output current of the dc dc regulator will be 2A, so note that when you start the project. There is a maximum frequency of 225kHz for this dc regulators.
LTC1624IS8#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 200kHz
Enable
PULSE WIDTH MODULATION
LTC1624IS8#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC1624IS8#TRPBF DC to DC converter applications.
- Computer application technology
- Plate bending machines
- Special machining machine tools
- Milling machines
- Motor controller circuits
- Hydraulic presses
- Magnetohydrodynamic power
- Computer rooms
- Automatic plug-in machines
- Electric heating, lighting
