LTC1628CG-SYNC#TRPBF
| Parameters | |
|---|---|
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 3.5V~30V |
| Control Features | Enable, Frequency Control, Power Good, Soft Start |
| Input Voltage (Min) | 3.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 3A |
| Frequency - Switching | 220kHz |
| Input Voltage (Max) | 36V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Duty Cycle (Max) | 99.4% |
| Clock Sync | No |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC1628 |
LTC1628CG-SYNC#TRPBF Overview
It comes in the 28-SSOP (0.209, 5.30mm Width) package, which makes switching controller suitable for most applications. The dc motor controller is adquate to generate for 2 outputs. PMIC is packaged in a solid enclosure of Tape & Reel (TR). The system can process Transistor Driver dc switching's outputs (s). 3.5V~30V is the operating voltage and supply voltage of the dc control. Worked in a 0°C~85°C TA dc switcher before. A switching controller such as this can switch at a value of 220kHz . The Surface Mount value makes it suitable for general dc dc regulator. To ensure efficient switching, this dcdc regulator features a Enable, Frequency Control, Power Good, Soft Start. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. Thare switching converters has a terminal (s) at DUAL . A variety of dc switching's functions can be performed on 28 terminations. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 15V is input. You can find other relevant dc to dc converter ics by searching "LTC1628". There is a particular type of Switching Regulator or Controllers in switching converter. An input voltage of 3.5V is the minimum required for the dc dc voltage regulator. Considering the dc to dc regulator can only accept 36V input voltage, it is important to take note of this. The output value is set to the greatest value of 3A.
LTC1628CG-SYNC#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 220kHz
Enable, Frequency Control, Power Good, Soft Start
PULSE WIDTH MODULATION
LTC1628CG-SYNC#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC1628CG-SYNC#TRPBF DC to DC converter applications.
- Scientific research
- Computer application technology
- Nuclear power plants
- Thermal power
- Post equipment
- Flexible manufacturing cells
- Emergency lighting monitoring equipment
- Adjustable voltage or current linear circuits
- Industrial controllers
- Industrial robots
