LTC1628CUH#PBF
| Parameters | |
|---|---|
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC1628 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 3.5V~30V |
| Control Features | Enable, Frequency Control, Power Good, Soft Start |
| Input Voltage (Min) | 3.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 3A |
| Frequency - Switching | 220kHz |
| Input Voltage (Max) | 36V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 360kHz |
| Max Duty Cycle | 99.4 % |
| Clock Sync | No |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 32-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 32 |
| Operating Temperature | 0°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
LTC1628CUH#PBF Overview
It comes in the 32-WFQFN Exposed Pad package, which makes switching controller suitable for most applications. There is enough capacity in the dc motor controller to generate the output for the 2 input. Packaging for the pmic consists of Tube solid enclosures. The system can process Transistor Driver dc switching's outputs (s). dc control's supply and operating voltages are 3.5V~30V. Worked in a 0°C~85°C TA dc switcher before. Using this switching controller, it is possible to switch at 220kHz. It is suitable for general dc dc regulator when it is set to Surface Mount. Enable, Frequency Control, Power Good, Soft Start provides dcdc regulator efficient switching control. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. QUAD are the position of the terminal of the switching converters. There are many different types of terminations for 32. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 15V. You can find other relevant dc to dc converter ics by searching "LTC1628". The switching converter has a total of 32 pins. Specifically, switching converter falls under the Switching Regulator or Controllers category. It is recommended that the input voltage of the dc dc voltage regulator be 3.5V. Considering the dc to dc regulator can only accept 36V input voltage, it is important to take note of this. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 99.4 %. It is estimated that this dc regulatorhas a maximum frequency of 360kHz. As a result, switching converter outputs current to the greatest value possible (3A).
LTC1628CUH#PBF Features
Transistor Driver Outputs
Switching Frequency: 220kHz
Enable, Frequency Control, Power Good, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 99.4 %
LTC1628CUH#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC1628CUH#PBF DC to DC converter applications.
- Sink circuits
- Radio equipment
- Surge protection circuits
- Imported equipment
- Grinders
- Post equipment
- Injection molding machinery
- Packaging
- Plate bending machines
- Scientific research
