LTC1628IG-SYNC#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC1628 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 3A |
| Voltage - Supply (Vcc/Vdd) | 3.5V~30V |
| Control Features | Enable, Frequency Control, Power Good, Soft Start |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 220kHz |
| Input Voltage (Max) | 36V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 360kHz |
| Duty Cycle (Max) | 99.4% |
| Clock Sync | No |
| Height | -50μm |
| Length | 10.5mm |
| Width | 5.6mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC1628IG-SYNC#PBF Overview
With a 28-SSOP (0.209, 5.30mm Width) package, the switching controller is suitable for a wide range of applications. It is sufficient to generate 2 outputs with this dc motor controller. Packaged in solid enclosures, this pmic has a Tube rating. With Transistor Driver dc switching's output (s), it is able to handle it. A 3.5V~30V voltage is supplied to the dc control and used for operating it. Suitable for work in a -40°C~85°C TA dc switcher. There is a switch at 220kHz that can be used with this controller. Surface Mount makes it suitable for general dc dc regulator. Enable, Frequency Control, Power Good, Soft Start is used for efficient switching control in the dcdc regulator. A SWITCHING CONTROLLER analog IC is connected to the switch converters. Switching converters are designed with the terminal (s) at position DUAL . Various 28 terminations. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's voltage input is 15V. Searching "LTC1628" will return other relevant dc to dc converter ics. 28 pins are present on switching converter. The type is a particular Switching Regulator or Controllers of switching converter. According to the test statistics, DC regulator outputs 5V voltage. Voltages 36V are the maximum that the dc to dc regulator will accept. In most cases, the output current of the dc dc regulator will be 3A, so note that when you start the project. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. 360kHz is the maximum frequency of this dc regulators.
LTC1628IG-SYNC#PBF Features
Transistor Driver Outputs
Switching Frequency: 220kHz
Enable, Frequency Control, Power Good, Soft Start
PULSE WIDTH MODULATION
LTC1628IG-SYNC#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC1628IG-SYNC#PBF DC to DC converter applications.
- seismic instrument power circuits
- Computer application technology
- Smart grid
- Digital video recorders
- Automatic plug-in machines
- Remotely powered electric motors
- USB circuits
- Shearing machines
- Photovoltaic power
- Experimental setup
