LTC1628IUH#PBF
| Parameters | |
|---|---|
| Output Current | 3A |
| Voltage - Supply (Vcc/Vdd) | 3.5V~30V |
| Control Features | Enable, Frequency Control, Power Good, Soft Start |
| Input Voltage (Min) | 3.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 220kHz |
| Input Voltage (Max) | 36V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 360kHz |
| Max Duty Cycle | 99.4 % |
| Clock Sync | No |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-WFQFN Exposed Pad |
| Number of Pins | 32 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC1628 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
LTC1628IUH#PBF Overview
As a result of 32-WFQFN Exposed Pad compact design, the switching controller is compatible with most applications. For 2 outputs, the dc motor controller is appropriate. The pmic is packaged in Tube solid enclosure. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sdc control's supply and operating voltages are 3.5V~30V. Suitable for working in an dc switcher that has a -40°C~85°C TA. Switching can be done at 220kHz with this switching controller. The Surface Mount allows it to be used for dc dc regulator in general. To ensure efficient switching, this dcdc regulator features a Enable, Frequency Control, Power Good, Soft Start. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. A switching converters's terminal (s) sits at the QUAD position. An array of 32 terminations of dc switching. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. DC switcher's input voltageis 15V volts. LTC1628 can be searched for other relevant dc to dc converter ics. There are a total of 32 pins on switching converter. In particular, switching converter is a type of Switching Regulator or Controllers. It is recommended to use 3.5V as the minimum input voltage of dc dc voltage regulator. A maximum voltage of 36V is accepted by the dc to dc regulator as an input voltage. In most cases, the dc dc regulator's output current is 3A. This information should be noted when you begin working with the component. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 99.4 %. Having a Surface Mount makes DC switcher ideal for most prototype and application designs. This dc regulatorhas a max frequency of 360kHz.
LTC1628IUH#PBF Features
Transistor Driver Outputs
Switching Frequency: 220kHz
Enable, Frequency Control, Power Good, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 99.4 %
LTC1628IUH#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC1628IUH#PBF DC to DC converter applications.
- Combined machine tools
- Machining centers
- Hydrogen power
- Servo drive system
- Magnetohydrodynamic power
- Elevator lighting
- Lathes
- Surge protection circuits
- Cutting machine tools
- Game consoles
