LTC1629CG#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~85°C TA |
| Packaging | Tube |
| Published | 2000 |
| Series | PolyPhase® |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Frequency | 300kHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC1629 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 36V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 5A |
| Voltage - Supply (Vcc/Vdd) | 4V~36V |
| Control Features | Enable, Phase Control, Power Good, Soft Start |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 220kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Nominal Input Voltage | 15V |
| Switcher Configuration | PUSH-PULL |
| Input Current | 470μA |
| Duty Cycle (Max) | 99.5% |
| Clock Sync | No |
| Height | -50μm |
| Length | 10.5mm |
| Width | 5.6mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC1629CG#PBF Overview
It comes in a 28-SSOP (0.209, 5.30mm Width) package, so switching controller can be used for most applications. This dc motor controller can be used to generate outputs with 2 numbers. An enclosure of Tube is used to package the PMIC. Transistor Driver dc switching's outputs (s) can be handled by it. dc controls with 4V~36V voltage are supplied and operated. Qualified to work in an dc switcher with 0°C~85°C TA. There is a switch at 220kHz that can be used with this controller. As it has a Surface Mount value, it can be used for general dc dc regulator. For efficient switching control, the dcdc regulator features Enable, Phase Control, Power Good, Soft Start. The switch converters are connected to a DUAL SWITCHING CONTROLLER analog IC. Thare switching converters has a terminal (s) at DUAL . A variety of dc switching's functions can be performed on 28 terminations. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. 15V nominal DC switcher's voltage input. Other relevant dc to dc converter ics can be found by searching "LTC1629". 28 pins are on switching converter. The type is a particular Switching Regulator or Controllers of switching converter. Statistically, DC regulator outputs 36V volts. In most cases, the dc dc regulator's output current is 5A. This information should be noted when you begin working with the component. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. A frequency of 300kHz is set for the switching controller. The dc to dc voltage regulator belongs to the PolyPhase? series. For nominal working status, the input voltage can be set as 15V. For operation, the switching converter could be satisfied with 470μA current flow input.
LTC1629CG#PBF Features
Transistor Driver Outputs
Switching Frequency: 220kHz
Enable, Phase Control, Power Good, Soft Start
PULSE WIDTH MODULATION
Frequency: 300kHz
LTC1629CG#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC1629CG#PBF DC to DC converter applications.
- Fire elevators
- Magnetohydrodynamic power
- Scientific research
- Hydrogen power
- Planers
- Machining centers
- Terrestrial set-top boxes
- Shearing machines
- Electrical power transmission
- Imported equipment
