LTC1629EG-6#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | PolyPhase® |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC1629 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 240A |
| Voltage - Supply (Vcc/Vdd) | 4V~36V |
| Control Features | Enable, Phase Control, Power Good, Soft Start |
| Input Voltage (Min) | 4V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 220kHz |
| Input Voltage (Max) | 36V |
| Control Technique | PHASE-SHIFT CONTROL |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 360kHz |
| Max Duty Cycle | 99.5 % |
| Clock Sync | No |
| Width | 5.3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC1629EG-6#PBF Overview
The switching controller fits in the 28-SSOP (0.209, 5.30mm Width) package and is ideal for most applications. It is sufficient to generate 2 outputs with this dc motor controller. Tube solid enclosure protects the pmic. With Transistor Driver dc switching's output (s), it is able to handle it. dc controls with 4V~36V voltage are supplied and operated. A -40°C~85°C TA dc switcher is not a problem. Using this switching controller, it is possible to switch at 220kHz. As it has a Surface Mount value, it can be used for general dc dc regulator. The dcdc regulator features Enable, Phase Control, Power Good, Soft Start for efficient switching control. A SWITCHING CONTROLLER analog IC is connected to the switch converters. The switching converters's terminal (s) are designed at DUAL . An array of 28 terminations of dc switching. It includes PHASE-SHIFT CONTROL as one of the control techniques dc dc converter ic adapts. There is a DC switcher's nominal voltage of 15V. You can find other relevant dc to dc converter ics by searching "LTC1629". The switching converter has a total of 28 pins. The type is a particular Switching Regulator or Controllers of switching converter. It is recommended to use 4V as the minimum input voltage of dc dc voltage regulator. The test statistics indicate that DC regulator outputs a voltage of 5V. The dc to dc regulator can only accept a maximum input voltage of 36V. In most cases, the output current of the dc dc regulator will be 240A, so note that when you start the project. A duty cycle set at 99.5 % ensures voltage regulator dc to dc reliability during power-on and power-off. The Surface Mount makes DC switcher suitable for most applications and prototypes. There is a maximum frequency of 360kHz for this dc regulators. PolyPhase? series dc to dc voltage regulator belong to this series.
LTC1629EG-6#PBF Features
Transistor Driver Outputs
Switching Frequency: 220kHz
Enable, Phase Control, Power Good, Soft Start
PHASE-SHIFT CONTROL
Max Duty Cycle: 99.5 %
LTC1629EG-6#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC1629EG-6#PBF DC to DC converter applications.
- Smoke exhaust equipment
- Large fire protection systems
- CNC system
- Computer-related products
- Nuclear power plants
- Various CNC machine tools
- Bending machines
- Linear guide
- Servo drive system
- Refrigerators of central air conditioners
