LTC1629IG-PG#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | PolyPhase® |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC1629 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 5A |
| Voltage - Supply (Vcc/Vdd) | 4V~36V |
| Control Features | Enable, Phase Control, Power Good, Soft Start |
| Input Voltage (Min) | 4V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 220kHz |
| Input Voltage (Max) | 36V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 360kHz |
| Duty Cycle (Max) | 99.5% |
| Clock Sync | No |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC1629IG-PG#PBF Overview
In the 28-SSOP (0.209, 5.30mm Width) package, the switching controller meets most application requirements. 2 outputs can be generated with the dc motor controller. There is a Tube solid enclosure around the pmic. The system can process Transistor Driver dc switching's outputs (s). The supply and operating voltage of the dc control are 4V~36V. A -40°C~85°C TA dc switcher is not a problem. There is a switch at 220kHz that can be used with this controller. The Surface Mount value makes it suitable for general dc dc regulator. To provide efficient switching control, Enable, Phase Control, Power Good, Soft Start is included in the dcdc regulator. An analog IC DUAL SWITCHING CONTROLLER is connected to the switch converters. switching converters terminal (s) are designed to be at DUAL. There are many different types of terminations for 28. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. DC switcher's input voltageis 15V volts. LTC1629 can be searched for other relevant dc to dc converter ics. Pins number 28 of switching converter in total. An input voltage of 4V is the minimum required for the dc dc voltage regulator. Statistically, DC regulator outputs 5V volts. The dc to dc regulator can only accept a maximum input voltage of 36V. A starting point for a project is to note down the dc dc regulator's usual output current, which is 5A. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. DC regulator's maximum frequency is 360kHz. PolyPhase? series dc to dc voltage regulator belong to this series.
LTC1629IG-PG#PBF Features
Transistor Driver Outputs
Switching Frequency: 220kHz
Enable, Phase Control, Power Good, Soft Start
PULSE WIDTH MODULATION
LTC1629IG-PG#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC1629IG-PG#PBF DC to DC converter applications.
- Medical monitoring systems
- Household control circuits
- Sink circuits
- Scientific testing
- Ball screw pair
- Precision electronic equipment
- Medical equipment
- PSRR circuits
- Motor controller circuits
- Magnetohydrodynamic power
