LTC1629IG#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | PolyPhase® |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC1629 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 5A |
| Voltage - Supply (Vcc/Vdd) | 4V~36V |
| Control Features | Enable, Phase Control, Power Good, Soft Start |
| Input Voltage (Min) | 4V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 220kHz |
| Input Voltage (Max) | 36V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 360kHz |
| Duty Cycle (Max) | 99.5% |
| Clock Sync | No |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC1629IG#TRPBF Overview
This switching controller fits most application requirements since it is packaged in a 28-SSOP (0.209, 5.30mm Width) package. There is sufficient capacity to generate switching controller for outputs 2. Tape & Reel (TR) solid enclosure protects the pmic. With this function, you can deal with Transistor Driver dc switching's outputs (s). A 4V~36V voltage is supplied to the dc control and used for operating it. Suitable for a -40°C~85°C TA dc switcher. This switching controller can switch at 220kHz. The Surface Mount allows it to be used for dc dc regulator in general. Switching control is made easier with the dcdc regulator's Enable, Phase Control, Power Good, Soft Start. The switch converters are connected to a DUAL SWITCHING CONTROLLER analog IC. There are a DUAL terminal on the switching converters. There are many different types of terminations for 28. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. 15V nominal DC switcher's voltage input. A search for "LTC1629" will reveal other relevant dc to dc converter ics. There are only 28 pins on switching converter. Input voltage of dc dc voltage regulator should be 4V. As determined by the test statistics, the output voltage of DC regulator is 5V. This dc to dc regulator accepts only 36V input voltage at most. In most cases, the output current of the dc dc regulator will be 5A, so note that when you start the project. This Surface Mount makes DC switcher suitable for most prototypes and applications. DC regulators have a maximum frequency of 360kHz. A dc to dc voltage regulator in the PolyPhase? series, it belongs to this family.
LTC1629IG#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 220kHz
Enable, Phase Control, Power Good, Soft Start
PULSE WIDTH MODULATION
LTC1629IG#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC1629IG#TRPBF DC to DC converter applications.
- Milling machines
- Wind power
- Overvoltage protection circuits in TV sets
- Constant current circuits
- Servo drive system
- Low output voltage switching power supply circuits
- Mobile phones
- ATMs
- Printing
- Refrigerators of central air conditioners
