LTC1643AHCGN#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Feature | Latched Fault, Thermal Limit, UVLO |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Hot Swap Controller |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Motherboard |
| Additional Feature | IT ALSO REQUIRES A -12V SUPPLY |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Voltage - Supply | 3.3V 5V ±12V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LTC1643 |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 12.6V |
| Power Supplies | 3.35+-12V |
| Number of Channels | 4 |
| Current - Output (Max) | 200mA 500mA |
| Adjustable Threshold | YES |
| Supply Current-Max (Isup) | 8mA |
| Internal Switch(s) | Both |
| Programmable Features | Current Limit, Fault Timeout, Slew Rate |
| Feature Pins | /FAULT, (ON, /ON), /PWRGD, TIMER |
| Height Seated (Max) | 1.727mm |
| Width | 3.899mm |
| RoHS Status | ROHS3 Compliant |
LTC1643AHCGN#TRPBF Overview
You get it with the 16-SSOP (0.154, 3.90mm Width) package.Currently, 4 channels can be accessed.In the form of a Tape & Reel (TR), it is packaged.Total terminations are 16.DUAL is the terminal position of the device.There are a total of 16 pins on it.High efficiency can be achieved by using 12V as supply voltage.There is a Surface Mount-like arrangement.This electrical component is classified as Hot Swap Controller.Hot-swappable device is recommended that the temperature is set to 0°C~70°C in order to ensure reliable performance.A Motherboard application is available for the device.As you can see in Latched Fault, Thermal Limit, UVLO, it's featured.Hot-swappable device should be able to work wHot-swappable deviceh a power source of 3.3V 5V ±12VV.LTC1643 is a family of numbers.As far as Power Management Circuits is concerned, this gadget is self-contained.Among its programmable features are Current Limit, Fault Timeout, Slew Rate.12.6V (maximum supply voltage) is set.Part 3.35+-12V uses a power supply that has a voltage.Its maximum supply current for operation is 8mA.Device output is 200mA 500mAV at its maximum.This device can also be used to produce IT ALSO REQUIRES A -12V SUPPLY as well.
LTC1643AHCGN#TRPBF Features
The terminal position of 16
Features of Latched Fault, Thermal Limit, UVLO
Programmable features of Current Limit, Fault Timeout, Slew Rate
LTC1643AHCGN#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC1643AHCGN#TRPBF hot swap controllers applications.
- Networking
- Raid
- Active current limit
- Current monitor output
- Comprehensive analog and digital capabilities
- Modern analog communication
- Temperature monitor output
- Network switch
- USB interface
- DC boost circuit
