LTC1643AHIGN#TRPBF
| Parameters | |
|---|---|
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Feature | Latched Fault, Thermal Limit, UVLO |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Hot Swap Controller |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Motherboard |
| Additional Feature | IT ALSO REQUIRES A -12V SUPPLY |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Voltage - Supply | 3.3V 5V ±12V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LTC1643 |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 12.6V |
| Power Supplies | 3.35+-12V |
| Number of Channels | 4 |
| Current - Output (Max) | 200mA 500mA |
| Adjustable Threshold | YES |
| Supply Current-Max (Isup) | 8mA |
| Internal Switch(s) | Both |
| Programmable Features | Current Limit, Fault Timeout, Slew Rate |
| Feature Pins | /FAULT, (ON, /ON), /PWRGD, TIMER |
| Height Seated (Max) | 1.727mm |
| Width | 3.899mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
LTC1643AHIGN#TRPBF Overview
This is included in the 16-SSOP (0.154, 3.90mm Width) package.4 channels are currently available.It's?packaged?in?the?form?of?a?Tape & Reel (TR).The 16 terminations total to three.This device has a terminal position of DUAL.A total of 16 pins are present on it.An efficient supply voltage is possible with 12V.Surface Mount is set up this way.Electric components of this type are classified as Hot Swap Controller.Hot-swappable device is recommended that the temperature is set to -40°C~85°C in order to ensure reliable performance.The device has Motherboard applicationsThe article appears in Latched Fault, Thermal Limit, UVLO.Hot-swappable device should be able to work wHot-swappable deviceh a 3.3V 5V ±12VV power source.LTC1643 is a family of numbers.As far as Power Management Circuits is concerned, this gadget is self-contained.There are Current Limit, Fault Timeout, Slew Rate features that can be programmed.12.6V is set for Vsup (maximum supply voltage).Hot-swappable device is 3.35+-12V type power supplies that are used in this part.This device's maximum supply current is 8mA.Its maximum output is 200mA 500mAV.The same device can also be used to produce IT ALSO REQUIRES A -12V SUPPLY.
LTC1643AHIGN#TRPBF Features
The terminal position of 16
Features of Latched Fault, Thermal Limit, UVLO
Programmable features of Current Limit, Fault Timeout, Slew Rate
LTC1643AHIGN#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC1643AHIGN#TRPBF hot swap controllers applications.
- Power supply hotswap & inrush control
- Continuous monitoring of device temperature
- Limitting the inrush current
- Load transient protection
- Base station
- Current limit and current foldback limit functions
- DC boost circuit
- Industrial
- Overcurrent protection
- Telecommunications
