LTC1693-2IS8#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2000 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~13.2V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LTC1693 |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Qualification Status | Not Qualified |
| Input Type | Inverting, Non-Inverting |
| Rise / Fall Time (Typ) | 16ns 16ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.075 μs |
| Output Peak Current Limit-Nom | 1.5A |
| Driven Configuration | High-Side or Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 1.7V 2.2V |
| Turn Off Time | 0.075 μs |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
LTC1693-2IS8#TRPBF Overview
For greater flexibility, its 8-SOIC (0.154, 3.90mm Width) package is used.A packaging method of Tape & Reel (TR) is indicated.2 drivers are incorporated for its configuration.Ideally, it should be mounted in the direction of Surface Mount.When the supply voltage is 4.5V~13.2V it is able to demonstrate its superiority.Gate drivers is designed wGate driversh a gate type of N-Channel MOSFET.This device is allowed to operate in a temperature range of -40°C~150°C TJ.A type of Inverting, Non-Inverting is used for input in this program.There are 8 terminations to form the base of its configuration.You will find various related parts under the base part number LTC1693.In order to operate, a voltage of 12V has to be applied.Mosfet driver utilizes the interface IC BUFFER OR INVERTER BASED MOSFET DRIVER.Its subcategory of MOSFET Drivers contains various useful electronic components.On the board, there are 8 component pins.
LTC1693-2IS8#TRPBF Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
LTC1693-2IS8#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC1693-2IS8#TRPBF gate drivers applications.
- Isolated Supplies for controller area network (CAN),
- Uninterruptible Power Supplies (UPS)
- High frequency line drivers
- General Purpose 3-Phase Inverter
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- High power buffers
- High current laser/LED systems
- Topologies
- Telecom switch mode power supplies
- Isolated Supplies for Motor Control
