LTC1693-5CMS8#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~150°C TJ |
| Packaging | Tube |
| Published | 2001 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Voltage - Supply | 4.5V~13.2V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC1693 |
| Pin Count | 8 |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 12V |
| Propagation Delay | 75 ns |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 75 ns |
| Rise Time | 85ns |
| Fall Time (Typ) | 75 ns |
| Rise / Fall Time (Typ) | 16ns 16ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Turn On Time | 0.075 µs |
| Output Peak Current Limit-Nom | 1.7A |
| Driven Configuration | High-Side |
| Gate Type | P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 1.7V 2.2V |
| Turn Off Time | 0.075 µs |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC1693-5CMS8#PBF Overview
Its 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package provides greater flexibility.There is a package in the form of Tube.The configuration is supported by 1 drivers.Surface Mount is the way in which it is mounted.A supply voltage of 4.5V~13.2V demonstrates its superiority.Gate type P-Channel MOSFET is designed for it.0°C~150°C TJ is the allowed temperature range for this device.Mosfet driver uses Inverting, Non-Inverting as Mosfet drivers input type.Initially, the configuration is composed of 8 terminations.There are various parts that can be found under its base part number LTC1693.When the device is designed, it has 8 pins.Mosfet driver is designed specifically to run on 12V volts of power.Mosfet driver employs an interface chip called BUFFER OR INVERTER BASED MOSFET DRIVER as Mosfet drivers interface chip.As a maximum, there is 1.5A limit to the output current.The board contains 8 pins for component connections.Mosfet gate drivers is recommended that 12V be set as the operating supply voltage.
LTC1693-5CMS8#PBF Features
Embedded in the Tube package
1 drivers
Employing a gate type of P-Channel MOSFET
8 pins
LTC1693-5CMS8#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC1693-5CMS8#PBF gate drivers applications.
- Motor controllers
- Video amplifiers
- Portable Media Players
- High-voltage isolated DC-DC converters
- PCMCIA applications
- Line drivers
- 3-Phase Motor Inverter Driver
- Motor Drives
- Solar power supplies
- Portable Navigation Devices
