LTC1709EG-8#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | 36-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 36 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2000 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 36 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC1709 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 3.5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 40A |
| Voltage - Supply (Vcc/Vdd) | 4V~36V |
| Control Features | Enable, Power Good, Soft Start |
| Input Voltage (Min) | 4V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 140kHz~320kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Max Frequency | 360kHz |
| Max Duty Cycle | 99.5 % |
| Clock Sync | No |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC1709EG-8#PBF Overview
With its 36-SSOP (0.209, 5.30mm Width) package, the switching controller fits the needs of most applications. dc motor controller is suitable for 2 output generation. PMIC is packaged in a solid enclosure of Tube. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sThis dc control has a supply voltage and operating voltage of 4V~36V. Suitable for working in an dc switcher that has a -40°C~85°C TA. The switching controller is capable of switching at the 140kHz~320kHz position. dc dc regulators can be carried out with Surface Mount. Enable, Power Good, Soft Start is used for efficient switching control in the dcdc regulator. A DUAL SWITCHING CONTROLLER analog IC is connected to the switch converters. There are a DUAL terminal on the switching converters. 36 terminations with a variety of function. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's input voltageis 15V volts. LTC1709 can be searched for other relevant dc to dc converter ics. 36 pins are on switching converter. In particular, switching converter belongs to the Switching Regulator or Controllers family. It is recommended to use 4V as the minimum input voltage of dc dc voltage regulator. DC regulator outputs 3.5V voltage based on test statistics. If you start a project, note down the dc dc regulator's usual output current of 40A. The maximum duty cycle of this voltage regulator dc to dc is set to 99.5 % to ensure reliability during power-up and power-down. This dc regulatorhas a max frequency of 360kHz.
LTC1709EG-8#PBF Features
Transistor Driver Outputs
Switching Frequency: 140kHz~320kHz
Enable, Power Good, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 99.5 %
LTC1709EG-8#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC1709EG-8#PBF DC to DC converter applications.
- Direct power supply system
- Grinders
- Printing equipment
- Scientific testing
- Injection molding machinery
- Combined machine tools
- Hydro power
- Wind power
- Surge protection circuits
- Automatic plug-in machines
