LTC1710IS8#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 400mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC1710 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 1A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Interface | I2C, SMBus |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Nominal Supply Current | 17μA |
| Output Configuration | High Side |
| Switch Type | General Purpose |
| Output Current per Channel | 300mA |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Over Temperature, UVLO |
| Rds On (Typ) | 400m Ω |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
LTC1710IS8#PBF Overview
It is packaged in the manner of a Tube.In the 8-SOIC (0.154, 3.90mm Width) package, it is included.In this case, the LED driving board is mounted as Surface Mount.General Purpose is the switch type that it owns.To ensure reliable operation, the temperature should be set to -40°C~85°C TA.By default, it is set to output 2.A maximum output voltage of N-Channel volts can be obtained with this LED driver.As you can see, it comes from the LTC1710 family.It consists of 8 terminations in total.For operation, 8 pins are used.As far as the lighting driver is concerned, there are 1 functions.In order to meet the operation criteria, the maximum output current drops to 1A.The supply voltage can be 5V for high efficiency.The LED driver has a total of 8 pins.There is 400mOhm resistance on the LED driver.Vsup (maximum supply voltage) is set to 5.5V.The analog IC used in this lighting driver is ANALOG CIRCUIT.
LTC1710IS8#PBF Features
Supplied from 5V
Resistance of 400mOhm
LTC1710IS8#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC1710IS8#PBF Power Switches ICs applications.
- Wireless Modem Data Cards
- Set-Top Boxes
- Storage (HDDs, SSDs)
- Portable Devices
- Hard Disk Drives
- Low Voltage I/O System Power
- Solid State Drivers
- PDAs
- Gaming
- Smartphone and PDA
