LTC1732EMS-8.4#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 9V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC1732 |
| Pin Count | 10 |
| Output Voltage | 8.4V |
| Power Supplies | 9V |
| Number of Channels | 2 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 8.8V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Current | 500mA |
| Adjustable Threshold | YES |
| Max Output Voltage | 8.4V |
| Min Input Voltage | 8.8V |
| Max Input Voltage | 12V |
| Supply Current-Max (Isup) | 3mA |
| Nominal Input Voltage | 12V |
| Battery Chemistry | Multi-Chemistry |
| Number of Cells | 2 |
| Programmable Features | Timer |
| Current - Charging | Constant - Programmable |
| Charge Current - Max | 585mA |
| Height | 860μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC1732EMS-8.4#PBF Overview
The package that has it is the Tube package.A 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package is included with this item as part of its contents.Mounting type Surface Mount matches the device.It is best to set the temperature to -40°C~85°C TA.In order to operate this device, an analog IC of POWER SUPPLY SUPPORT CIRCUIT must be used.For the device to be charged, there is Constant - Programmable current required.There are related parts to this device according to the base part number LTC1732.As a whole, it contains 10 terminations.This board has 10 pins, making it very simple to construct.This feature allows for programmability, such as Timer.On the device, it is listed as having a charge current of 585mA.During the installation process, this product requires the connection of 10 pins.In total, this application supports 2 channels.Using a 9V battery should be enough to run it.The board is capable of handling a voltage input of zero volts.It is possible to achieve optimum efficiency in the case of a given output voltage of 8.4V.A 500mA output current is used for operation.This device is classified as Power Management Circuits under the subcategory.The device can operate at as low a supply voltage as possible, such as 8.8V.It is set to 3mA for Vsup (maximum supply voltage).The part's power supply is set to 9V.It has a 8.8V volt minimum input voltage.A maximum input voltage of 12V volts can be applied to it.To fulfill the operation requirements, the maximum output supply voltage is reduced to 8.4V.
LTC1732EMS-8.4#PBF Features
2 channels
Power Management Circuits subcategory
10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package
LTC1732EMS-8.4#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC1732EMS-8.4#PBF Battery Chargers ICs applications.
- Robot
- Mobile point-of-sale (mPOS) terminals
- Cellphones
- Electric lift car
- Personnel carriers
- Automotive battery charger circuits
- Painting boat
- Forklift
- Material handling
- Boat
