LTC1760CFW#PBF
| Parameters | |
|---|---|
| Supply Voltage | 20V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC1760 |
| Pin Count | 48 |
| Output Voltage | 5.2V |
| Max Output Current | 2mA |
| Number of Channels | 2 |
| Interface | I2C |
| Max Supply Voltage | 28V |
| Min Supply Voltage | 0V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Current | 4A |
| Adjustable Threshold | YES |
| Max Output Voltage | 5.5V |
| Min Input Voltage | 6V |
| Max Input Voltage | 28V |
| Nominal Input Voltage | 28V |
| Min Output Voltage | 4.9V |
| Battery Chemistry | Smart Batteries |
| Number of Cells | 2 |
| Current - Charging | Constant - Programmable |
| Charge Current - Max | 4.28A |
| Height | 950μm |
| Length | 12.6mm |
| Width | 6.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Surface Mount | YES |
| Number of Pins | 48 |
| Operating Temperature | 0°C~85°C TA |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
LTC1760CFW#PBF Overview
It is available in the package Tube.An included version of it is available in the package 48-TFSOP (0.240, 6.10mm Width).In this case, the device has a mounting type of Surface Mount.If the temperature is set to 0°C~85°C TA, reliable performance will be assured.There is an analog IC of POWER SUPPLY SUPPORT CIRCUIT used in this device.Charge the device by supplying it with Constant - Programmable current.Based on the base part number LTC1760, its related parts can be identified.It has a total of 48 terminations.48 pins are included in the package.As far as the charging current is concerned, it is 4.28A at full charge.For it to work, 48 pins are required.A total of 2 channels are available.There is a possibility that it can be powered by a 20V battery.With a 28V supply voltage, it is capable of withstanding the operation of the device.The possibility of optimal efficiency exists if 5.2V output voltage is used as the output voltage.It is performed with a current output of 4A for the output of the operation.There is one subcategory of this device, and it is Power Management Circuits.It is capable of functioning at a voltage as low as possible, for example 0V voltage for this circuit is used.Input voltage minimum is 6V volts, which is a requirement of the device.Voltage input can be as low as 28V volts at its maximum.It is mandatory to set the voltage at 5.5V for the maximum output supply voltage for this operation.It is possible to reduce the maximum output current to 2mA when the operation is in progress.
LTC1760CFW#PBF Features
2 channels
Power Management Circuits subcategory
48-TFSOP (0.240, 6.10mm Width) package
LTC1760CFW#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC1760CFW#PBF Battery Chargers ICs applications.
- Tablets
- Painting boat
- Floor scrubber
- Electricity bank
- Automotive/electrical vehicle
- Portable speaker systems
- USB power delivery (USB-C) devices
- Electrical Utility industry
- Home appliances
- GPS portable devices
