LTC1772BES6#TRMPBF
| Parameters | |
|---|---|
| Base Part Number | LTC1772 |
| Function | Step-Up, Step-Down, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 9.8V |
| Output Type | Transistor Driver |
| Max Output Current | 1A |
| Input Voltage-Nom | 4.2V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 2.5V~9.8V |
| Control Features | Enable |
| Topology | Buck, Boost, Flyback |
| Control Mode | CURRENT-MODE |
| Max Input Voltage | 9.8V |
| Synchronous Rectifier | No |
| Min Output Voltage | 800mV |
| Switcher Configuration | SINGLE |
| Duty Cycle (Max) | 100% |
| Length | 2.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.95mm |
| Frequency | 550kHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
LTC1772BES6#TRMPBF Overview
In the SOT-23-6 Thin, TSOT-23-6 package, the switching controller meets most application requirements. For 1 outputs, the dc motor controller is appropriate. PMIC packaging is solid with a Cut Tape (CT) enclosure. The system can process Transistor Driver dc switching's outputs (s). This dc control operates at 2.5V~9.8V and has a 2.5V~9.8V supply voltage. Workable in an dc switcher where -40°C~85°C TA is the -40°C~85°C TArm. The Surface Mount allows it to be used for dc dc regulator in general. To provide efficient switching control, Enable is included in the dcdc regulator. An analog IC SWITCHING CONTROLLER is connected to the switch converters. The switching converters's terminal (s) are designed at DUAL . Various 6 terminations. The DC switcher's nominal voltage is 4.2V. A search for "LTC1772" will reveal other relevant dc to dc converter ics. Total pins of switching converter are 6. Switching converter is a type of Switching Regulator or Controllers in particular. Statistically, the DC regulator outputs 9.8V voltage. It's important to remember that the dc dc regulator's normaloutput current is 1A, so you should note it down when starting a new project. A frequency of 550kHz is set for the switching controller. In order to ensure the dc switcher's functionality, users must limit the voltage to 9.8V due to the dc switcher's maximum input voltage. There will be 1A current output from the dc switcher above 1A. 800mV voltage output is lower than 800mV.
LTC1772BES6#TRMPBF Features
Transistor Driver Outputs
Enable
Frequency: 550kHz
LTC1772BES6#TRMPBF Applications
There are a lot of Linear Technology/Analog Devices LTC1772BES6#TRMPBF DC to DC converter applications.
- Scientific testing
- Thermal power
- Television equipment
- Telecommunications equipment
- Constant current circuits
- Household control circuits
- Smoke prevention equipment
- Bending machines
- Production lines
- Hydrogen power
