LTC1772CS6#TRMPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC1772 |
| Function | Step-Up, Step-Down, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 9.8V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 4.2V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 5A |
| Voltage - Supply (Vcc/Vdd) | 2.5V~9.8V |
| Control Features | Enable |
| Max Output Voltage | 2.4V |
| Topology | Buck, Boost, Flyback |
| Min Input Voltage | 2.5V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 550kHz |
| Max Input Voltage | 9.8V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Min Output Voltage | -300mV |
| Max Frequency | 650kHz |
| Duty Cycle (Max) | 100% |
| Height | 900μm |
| Length | 2.9mm |
| Width | 1.75mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC1772CS6#TRMPBF Overview
Capsuled in the SOT-23-6 Thin, TSOT-23-6 package, the switching controller suits most application needs. For 1 outputs, the dc motor controller is appropriate. Tape & Reel (TR) solid enclosure protects the pmic. With Transistor Driver dc switching's output (s), it is able to handle it. This dc control has a supply voltage and operating voltage of 2.5V~9.8V. Suitable for a 0°C~70°C TA dc switcher. This switching controller can switch at 550kHz. The Surface Mount makes it ideal for general dc dc regulator. To ensure efficient switching, this dcdc regulator features a Enable. A SWITCHING CONTROLLER analog IC is connected to the switch converters. switching converters terminal (s) are designed to be at DUAL. The 6 terminations can be used for a wide range of dc switching. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. DC switcher's input voltageis 4.2V volts. Other relevant dc to dc converter ics will be returned if you search "LTC1772". 6 pins are present on switching converter. DC regulator outputs 9.8V voltage based on test statistics. normally, the dc dc regulator's output current is 5A, which you should keep in mind when starting a project. DC regulator's maximum frequency is 650kHz. The maximum input voltage of the dc switcher is 9.8V, so users need to limit the voltage accordingly. Voltage 2.5V is needed for the supply. Datasheets indicate that the switching converter can output 2.4V volts at its maximum. There is -300mV voltage output lower than -300mV on the voltage controller.
LTC1772CS6#TRMPBF Features
Transistor Driver Outputs
Switching Frequency: 550kHz
Enable
PULSE WIDTH MODULATION
LTC1772CS6#TRMPBF Applications
There are a lot of Linear Technology/Analog Devices LTC1772CS6#TRMPBF DC to DC converter applications.
- SMT equipment
- Direct power supply system
- Automation technology
- Bending machines
- Scientific research
- Gear/thread machining machines
- Refrigerators of central air conditioners
- Handheld GPS
- Fire elevators
- Various precision measuring detectors
