LTC1775IGN#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2000 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC1775 |
| Function | Step-Down, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 36V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive or Negative |
| Output Current | 20A |
| Voltage - Supply (Vcc/Vdd) | 4.3V~36V |
| Control Features | Enable, Soft Start |
| Input Voltage (Min) | 4V |
| Topology | Buck, Buck-Boost |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 150kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 50ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 50 ns |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 165kHz |
| Max Duty Cycle | 99 % |
| Length | 4.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC1775IGN#PBF Overview
As a result of 16-SSOP (0.154, 3.90mm Width) compact design, the switching controller is compatible with most applications. For outputs of 1, this dc motor controller is suitable. Tube solid enclosure protects the pmic. With Transistor Driver dc switching's output (s), it is able to handle it. dc control's supply and operating voltages are 4.3V~36V. Work well in dc switchers with a -40°C~85°C TA. A switching controller such as this can switch at a value of 150kHz . The Surface Mount allows it to be used for dc dc regulator in general. Enable, Soft Start provides dcdc regulator efficient switching control. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. There are a DUAL terminal on the switching converters. 16 terminations with various dc switching's functions. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 15V. A search for "LTC1775" will reveal other relevant dc to dc converter ics. Pins number 16 of switching converter in total. Switching converter type is specifically Switching Regulator or Controllers. An input voltage of 4V is the minimum required for the dc dc voltage regulator. DC regulator outputs 36V voltage according to the test statistics. If you start a project, note down the dc dc regulator's usual output current of 20A. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 99 %. DC regulator has a maximum frequency of 165kHz.
LTC1775IGN#PBF Features
Transistor Driver Outputs
Switching Frequency: 150kHz
Enable, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 99 %
LTC1775IGN#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC1775IGN#PBF DC to DC converter applications.
- Emergency lighting monitoring equipment
- Power supplies of electronic gadgets
- Wide-range voltage regulation circuits
- Network technology
- Overvoltage protection circuits in TV sets
- Large fire protection systems
- Automatic testing equipment
- Adjustable voltage or current linear circuits
- Various precision measuring instruments
- Medical equipment
