LTC1778IGN#PBF
| Parameters | |
|---|---|
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC1778 |
| Function | Step-Down, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 32.4V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive or Negative |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | 4V~36V |
| Control Features | Enable, Power Good, Soft Start |
| Input Voltage (Min) | 4V |
| Topology | Buck, Buck-Boost |
| Control Mode | CURRENT-MODE |
| Input Voltage (Max) | 36V |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Height | 1.5mm |
| Length | 4.98mm |
| Width | 3.99mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.635mm |
LTC1778IGN#PBF Overview
The switching controller fits in the 16-SSOP (0.154, 3.90mm Width) package and is ideal for most applications. This dc motor controller can be used to generate outputs with 1 numbers. The pmic is packaged in Tube solid enclosure. It is capable of handling Transistor Driver dc switching's outputs (s). 4V~36V is the supply voltage and the operating voltage of the dc control. Suitable for working in an dc switcher that has a -40°C~125°C TJ. dc dc regulator can be generalized using Surface Mount. In order to control switching efficiently, the dcdc regulator features Enable, Power Good, Soft Start. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. Terminal (s) of the switching converters are designed at the DUAL position. A variety of 16 terminations are available in dc switching. A DC switcher's nominal voltage of 15V is input. LTC1778 can be used to locate other relevant dc to dc converter ics. In total, switching converter has 16 pins. Specially, switching converter corresponds to type Switching Regulator or Controllers. 4V should be the minimum input voltage for the dc dc voltage regulator. A 32.4V voltage of DC regulator was detected in the test statistics. It should be fully noted that the dc to dc regulator only accepts 36V input voltage at most. In most cases, the output current of the dc dc regulator will be 2A, so note that when you start the project. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications.
LTC1778IGN#PBF Features
Transistor Driver Outputs
Enable, Power Good, Soft Start
LTC1778IGN#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC1778IGN#PBF DC to DC converter applications.
- Plate bending machines
- Hydrogen power
- Scientific testing
- Boring machines
- Surge protection circuits
- seismic instrument power circuits
- USB circuits
- Correction machines
- Television equipment
- Computer application technology
