LTC1841IS8
| Parameters | |
|---|---|
| Package / Case | S |
| Number of Pins | 8 |
| Type | General Purpose |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Number of Elements | 2 |
| Number of Channels | 2 |
| Max Supply Voltage | 12.6V |
| Min Supply Voltage | 2.5V |
| Power Dissipation | 500mW |
| Propagation Delay | 12 μs |
| Quiescent Current | 5.7μA |
| Response Time | 60 μs |
| Common Mode Rejection Ratio | 80 dB |
| Input Offset Voltage (Vos) | 10mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Max Dual Supply Voltage | 5.5V |
| Min Dual Supply Voltage | 1V |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
LTC1841IS8 Overview
In order to make transportation easier, it is packaged in S .It's a typical General Purpose comparator.Electronic comparator has a total of 2 elements.8 pins are present on the comparator.The comparator presents a quiescent current of 5.7μA volts.Comparator electronics is not recommended to operate the system at a temperature above 85°C .Comparator electronics is not suComparator electronicsable for temperatures below -40°C .12.6V is the maximum supply voltage of the comparator.There is a minimum supply voltage of 2.5V for this comparator.The output quality is maintained by the cooperation of 2 channels.
LTC1841IS8 Features
General Purpose IC
Employing 2 elements
Quiescent Current: 5.7μA
LTC1841IS8 Applications
There are a lot of Analog Devices, Inc. LTC1841IS8 linear comparators applications.
- Portable and Battery-Powered Systems
- Metering Systems
- General Purpose Low Voltage Applications
- Point of load regulators
- Appliances
- Battery management and protection
- Wearable Devices
- Pulse, Squarewave, and Time Delay Generators
- Notebooks and PDAs
- Infotainment & cluster
