LTC1841IS8#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 1998 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC1841 |
| Pin Count | 8 |
| Output Type | Open Drain |
| Number of Elements | 2 |
| Power Dissipation | 500mW |
| Propagation Delay | 12 μs |
| Quiescent Current | 5.7μA |
| Supply Current-Max | 0.0057mA |
| Response Time | 5000 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2V~11V ±1V~5.5V |
| Input Offset Voltage (Vos) | 10mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Current - Quiescent (Max) | 5.7μA |
| Voltage - Input Offset (Max) | 10mV @ 5V |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC1841IS8#PBF Overview
A convenient transport package is provided in 8-SOIC (0.154, 3.90mm Width) .The comparator has a type Open Drain output.We ship the part through Tube .The device is designed with 8 terminations.Electronic comparator is a component of the Comparator family.Electronic comparator is capable of performing numerous tasks when powered by 3V voltage.It's a typical General Purpose comparator.There are a total of 2 elements in it.As a result, it contains 8 pins.A Surface Mount mounting type is recommended.Ideally, the operating temperature should be set at -40°C~85°C in order to prevent malfunction.8 pins are present on the comparator.You can find more pin-to-pin solutions by searching LTC1841 .There is a quiescent current of 5.7μA in this comparator.With this part, a minimum current of 0.0057mA can be supplied.
LTC1841IS8#PBF Features
Open Drain output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 5.7μA
LTC1841IS8#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC1841IS8#PBF linear comparators applications.
- Zero-Crossing Detectors
- RC Timers
- Handheld Instruments
- Hand-Held Electronics
- Portable Battery Monitoring
- Ultra-Low Power Systems
- Infotainment and Clusters
- Limit Comparators
- Power management
- High-Speed Sampling Circuits
