LTC1871EMS-7#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC1871 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 36V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 8V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 6V~36V |
| Control Features | Enable, Frequency Control |
| Input Voltage (Min) | 6V |
| Topology | Boost, Flyback, SEPIC |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 0.02A |
| Frequency - Switching | 50kHz~1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 17ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 8 ns |
| Switcher Configuration | SINGLE |
| Max Frequency | 1MHz |
| Duty Cycle (Max) | 92% |
| Clock Sync | Yes |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC1871EMS-7#TRPBF Overview
This switching controller fits most application requirements since it is packaged in a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package. For 1 outputs, the dc motor controller is appropriate. Packaging for the pmic consists of Tape & Reel (TR) solid enclosures. There are Transistor Driver dc switching's output (s) that it can handle. A 6V~36V voltage is supplied to the dc control and used for operating it. Worked in an dc switcher with a -40°C~85°C TA rating. In this switching controller, the switch can be set to 50kHz~1MHz. The Surface Mount allows it to be used for dc dc regulator in general. Enable, Frequency Control provides dcdc regulator efficient switching control. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. switching converters terminal (s) are designed to be at DUAL. 10 terminations with various dc switching's functions. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. DC switcher's voltage input of 8V. Searching "LTC1871" will return other relevant dc to dc converter ics. There are only 10 pins on switching converter. Switching converter is a special type of Switching Regulator or Controllers. This dc dc voltage regulator should be powered by a voltage of 6V. As determined by the test statistics, the output voltage of DC regulator is 36V. There is a maximum frequency of 1MHz on this dc regulators. 0.02A is the greatest value switching converter outputs as current.
LTC1871EMS-7#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 50kHz~1MHz
Enable, Frequency Control
PULSE WIDTH MODULATION
LTC1871EMS-7#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC1871EMS-7#TRPBF DC to DC converter applications.
- Energy management systems
- Window air conditioners
- Refrigerators of central air conditioners
- Packaging
- Geothermal power
- Smoke exhaust equipment
- Automatic plug-in machines
- Serial communication converter
- Wind power
- Product burn-in
