LTC1871HMS#PBF
| Parameters | |
|---|---|
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC1871 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 7V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive or Negative |
| Output Current | 50mA |
| Voltage - Supply (Vcc/Vdd) | 2.5V~36V |
| Control Features | Enable, Frequency Control |
| Input Voltage (Min) | 2.5V |
| Topology | Boost, Flyback, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 50kHz~1MHz |
| Input Voltage (Max) | 36V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 17ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 8 ns |
| Switcher Configuration | SINGLE |
| Max Frequency | 1MHz |
| Max Duty Cycle | 97 % |
| Duty Cycle (Max) | 92% |
| Clock Sync | Yes |
| Height | 860μm |
| Length | 3mm |
LTC1871HMS#PBF Overview
Capsuled in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, the switching controller suits most application needs. This dc motor controller can be used to generate outputs with 1 numbers. Packaged in solid enclosures, this pmic has a Tube rating. Transistor Driver dc switching's outputs (s) can be handled by it. dc controls with 2.5V~36V voltage are supplied and operated. Suitable for work in a -40°C~150°C TJ dc switcher. A switching controller such as this can switch at a value of 50kHz~1MHz . The Surface Mount value makes it suitable for general dc dc regulator. Switching control is made easier with the dcdc regulator's Enable, Frequency Control. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. There are a DUAL terminal on the switching converters. Various 10 terminations. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. 5V nominal DC switcher's voltage input. Other relevant dc to dc converter ics can be found by searching "LTC1871". There are 10 pins on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. It is recommended that the dc dc voltage regulator's minimum input voltage be 2.5V. DC regulator outputs 7V voltage based on test statistics. The dc to dc regulator can only accept 36V input voltage. In most cases, the output current of the dc dc regulator will be 50mA, so note that when you start the project. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 97 %. DC regulator's maximum frequency is 1MHz.
LTC1871HMS#PBF Features
Transistor Driver Outputs
Switching Frequency: 50kHz~1MHz
Enable, Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 97 %
LTC1871HMS#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC1871HMS#PBF DC to DC converter applications.
- Electric heating, lighting
- Imported equipment
- Window air conditioners
- Series voltage regulation circuits
- Thermal power
- CNC system
- Smart grid
- Machining centers
- Laboratories
- Injection molding machinery
