LTC1871IMS#PBF
| Parameters | |
|---|---|
| Topology | Boost, Flyback, SEPIC |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 0.05A |
| Frequency - Switching | 50kHz~1MHz |
| Input Voltage (Max) | 36V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Duty Cycle (Max) | 92% |
| Clock Sync | Yes |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC1871 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive or Negative |
| Voltage - Supply (Vcc/Vdd) | 2.5V~36V |
| Control Features | Enable, Frequency Control |
| Input Voltage (Min) | 2.5V |
LTC1871IMS#PBF Overview
Capsuled in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, the switching controller suits most application needs. It is sufficient to generate 1 outputs with this dc motor controller. PMIC is packaged in a solid enclosure of Tube. It is capable of handling Transistor Driver dc switching's outputs (s). Voltages 2.5V~36V are the dc control's supply voltage and operating voltage, respectively. Workable in an dc switcher where -40°C~125°C TJ is the -40°C~125°C TJrm. It can switch at 50kHz~1MHz. A generalization of dc dc regulator can be made using Surface Mount. For efficient switching control, the dcdc regulator features Enable, Frequency Control. An analog IC SWITCHING CONTROLLER is connected to the switch converters. DUAL are the position of the terminal of the switching converters. 10 terminations with a variety of function. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 5V. A search for "LTC1871" will reveal other relevant dc to dc converter ics. Specially, switching converter corresponds to type Switching Regulator or Controllers. It is recommended to use 2.5V as the minimum input voltage of dc dc voltage regulator. It should be fully noted that the dc to dc regulator only accepts 36V input voltage at most. Whenever the current value is 0.05A, switching converter outputs the highest possible value.
LTC1871IMS#PBF Features
Transistor Driver Outputs
Switching Frequency: 50kHz~1MHz
Enable, Frequency Control
PULSE WIDTH MODULATION
LTC1871IMS#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC1871IMS#PBF DC to DC converter applications.
- Computer application technology
- Plate bending machines
- Automatic plug-in machines
- Milling machines
- Analog precision reference circuits
- Precision electronic equipment
- CMM
- Various precision measuring detectors
- Flaw detection equipment
- Game consoles
