LTC1872ES6#TRMPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2001 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Terminal Pitch | 0.95mm |
| Frequency | 550kHz |
| Base Part Number | LTC1872 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 10.3V |
| Output Type | Transistor Driver |
| Max Output Current | 1A |
| Input Voltage-Nom | 4.2V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 2.5V~9.8V |
| Control Features | Enable |
| Topology | Boost, SEPIC |
| Min Input Voltage | 2.5V |
| Control Mode | CURRENT-MODE |
| Max Input Voltage | 9.8V |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Height | 1.3mm |
| Length | 3mm |
| Width | 1.75mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC1872ES6#TRMPBF Overview
Capsuled in the SOT-23-6 Thin, TSOT-23-6 package, the switching controller suits most application needs. The dc motor controller is adquate to generate for 1 outputs. There is a Cut Tape (CT) solid enclosure around the pmic. With this function, you can deal with Transistor Driver dc switching's outputs (s). The supply and operating voltage of the dc control are 2.5V~9.8V. Qualified to work in an dc switcher with -40°C~85°C TA. The Surface Mount allows it to be used for dc dc regulator in general. DCDC regulator is controlled efficiently by Enable. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. The switching converters's terminal (s) are designed at DUAL . 6 terminations with various dc switching's functions. It is inputted with a DC switcher's voltage of 4.2V. Other relevant dc to dc converter ics can be found by searching "LTC1872". The switching converter has a total of 6 pins. A 10.3V voltage of DC regulator was detected in the test statistics. If you start a project, note down the dc dc regulator's usual output current of 1A. Switching controllers operate at 550kHz frequencies. The dc switcher's maximum input voltage is 9.8V, so users must limit the voltage accordingly. A voltage of 2.5V is required for the supply. DC switcher will not be able to provide an output current above 1A volts.
LTC1872ES6#TRMPBF Features
Transistor Driver Outputs
Enable
Frequency: 550kHz
LTC1872ES6#TRMPBF Applications
There are a lot of Linear Technology/Analog Devices LTC1872ES6#TRMPBF DC to DC converter applications.
- Computer-related products
- Alternators
- Mobile phones
- Window air conditioners
- Thermal power
- Hydraulic presses
- Computer application technology
- Digital video recorders
- ATMs
- Network technology
