LTC1875EGN#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.635mm |
| Frequency | 605kHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC1875 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Efficiency | 95 % |
| Voltage - Input (Max) | 6V |
| Output Voltage | 7V |
| Output Type | Adjustable |
| Max Output Current | 1.5A |
| Voltage - Input (Min) | 2.65V |
| Input Voltage-Nom | 3.6V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Max Output Voltage | 6V |
| Voltage - Output (Min/Fixed) | 0.8V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 550kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 800mV |
| Height | 1.478mm |
| Length | 4.98mm |
| Width | 3.81mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC1875EGN#PBF Overview
This harley voltage regulator utilizes the Tube package for optimized performance. This harley voltage regulator has 16 terminations. The type of analog IC that this voltage regulator is equipped with is SWITCHING REGULATOR. Space savings are achieved by placing this voltage regulator in the 16-SSOP (0.154, 3.90mm Width) package. In this case, DC DC switching regulator has 1 outputs configured to it. Adjustable outputs are generated on the output pins of this adjusting voltage regulator. There is a switching regulator that is compatible with the Surface Mount mounting. This voltage regulator 12v should operate at a temperature of -40°C~85°C TA when operating. In this voltage regulator 12v, the switching frequency is 550kHz. Regulator 2.65V can operate with dc to dc voltage regulator's minimum input voltage 2.65V. As shown in the table below, adjusting voltage regulator's output voltage (Min/Fixed) is equal to 0.8V. There is a maximum input voltage of 6V for this voltage regulator 12v. Due to its 260 high peak reflow temperature, this voltage regulator 12v is virtually indestructible. For operation, switching regulator requires a nominal input voltage of 3.6V. In terms of category, this voltage regulator 12v falls into the Switching Regulator or Controllers category. The LTC1875 family of DC/DC regulators includes this DC/DC regulator. A voltage of 7V volts can be generated by DC DC switching regulator. 16 pins are used for switching regulator operation. In order to use this voltage regulator 12v at its full potential, the output voltage should be kept at at least 800mV. Switching regulator has a maximum output current of 1.5A A, which is sufficient to meet the requirements of operation. The maximum output voltage of this regulator voltage is 6V. A frequency of 605kHz allows dc to dc voltage regulator to maintain high accuracy.
LTC1875EGN#PBF Features
1 outputs
Peak reflow temperature (Cel) of 260
16 pins
LTC1875EGN#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC1875EGN#PBF Voltage Regulators applications.
- Thermal power
- Emergency lighting monitoring equipment
- Automatic testing equipment
- Boring machines
- Computed tomography (CT)
- Drilling machines
- Industrial robots
- Smart grid
- Photovoltaic power
- Automatic plug-in machines
