LTC1922EG-1#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2001 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO CONFIGURABLE IN CURRENT MODE |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC1922 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Voltage | 5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 9.5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 100A |
| Voltage - Supply (Vcc/Vdd) | 3.8V~10.3V |
| Control Features | Ramp, Soft Start |
| Topology | Full-Bridge |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | Up to 1MHz |
| Control Technique | PHASE-SHIFT CONTROL |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 1MHz |
| Duty Cycle (Max) | 99% |
| Height Seated (Max) | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC1922EG-1#TRPBF Overview
It comes in a 20-SSOP (0.209, 5.30mm Width) package, so switching controller can be used for most applications. 1 outputs can be generated with the dc motor controller. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. Transistor Driver dc switching's outputs (s) are supported. dc control's supply and operating voltages are 3.8V~10.3V. Qualified to work in a -40°C~85°C TA dc switcher. Switching can be done at Up to 1MHz with this switching controller. Surface Mount makes it suitable for general dc dc regulator. Ramp, Soft Start provides dcdc regulator efficient switching control. SWITCHING CONTROLLER analog IC connects the switch converters. A switching converters's terminal (s) sits at the DUAL position. The 20 terminations can be used for a wide range of dc switching. This dc dc converter ic uses a variety of control techniques, including PHASE-SHIFT CONTROL. There is a DC switcher's nominal voltage of 9.5V. Other relevant dc to dc converter ics will be returned if you search "LTC1922". Pins number 20 of switching converter in total. Test statistics indicate DC regulator outputs 5V voltage. In most cases, the output current of the dc dc regulator will be 100A, so note that when you start the project. DC regulator's maximum frequency is 1MHz. As a result, DC to DC voltage regulator has a value of ALSO CONFIGURABLE IN CURRENT MODE so that the need can be met more directly.
LTC1922EG-1#TRPBF Features
Transistor Driver Outputs
Switching Frequency: Up to 1MHz
Ramp, Soft Start
PHASE-SHIFT CONTROL
ALSO CONFIGURABLE IN CURRENT MODE
LTC1922EG-1#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC1922EG-1#TRPBF DC to DC converter applications.
- Electrical power transmission
- Milling machines
- Thermal power
- Arc suppression circuits
- Serial communication converter
- Alternators
- Special machining machine tools
- Current source circuits
- Lathes
- Magnetohydrodynamic power
