LTC1922IG-1#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2001 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO CONFIGURABLE IN CURRENT MODE |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC1922 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Voltage | 5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 9.5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 100A |
| Voltage - Supply (Vcc/Vdd) | 3.8V~10.3V |
| Control Features | Ramp, Soft Start |
| Topology | Full-Bridge |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | Up to 1MHz |
| Control Technique | PHASE-SHIFT CONTROL |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 1MHz |
| Duty Cycle (Max) | 99% |
| Height Seated (Max) | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC1922IG-1#TRPBF Overview
It comes in a 20-SSOP (0.209, 5.30mm Width) package, so switching controller can be used for most applications. The dc motor controller is adquate to generate for 1 outputs. A solid enclosure of Tape & Reel (TR) surrounds pmic. There are Transistor Driver dc switching's output (s) that it can handle. 3.8V~10.3V is the supply voltage and the operating voltage of the dc control. Suitable for work in a -40°C~85°C TA dc switcher. Switching can be done at Up to 1MHz with this switching controller. dc dc regulators can be carried out with Surface Mount. For efficient switching control, the dcdc regulator features Ramp, Soft Start. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. A switching converters's terminal (s) sits at the DUAL position. A variety of dc switching's functions can be performed on 20 terminations. This dc dc converter ic uses a variety of control techniques, including PHASE-SHIFT CONTROL. DC switcher's input voltageis set to 9.5V. In addition to "LTC1922", there are other relevant dc to dc converter ics you can find. Pins number 20 of switching converter in total. A 5V voltage of DC regulator was detected in the test statistics. normally, the dc dc regulator's output current is 100A, which you should keep in mind when starting a project. DC regulator has a maximum frequency of 1MHz. The value of DC to DC voltage regulator is set to ALSO CONFIGURABLE IN CURRENT MODE in order to better satisfy the requirement.
LTC1922IG-1#TRPBF Features
Transistor Driver Outputs
Switching Frequency: Up to 1MHz
Ramp, Soft Start
PHASE-SHIFT CONTROL
ALSO CONFIGURABLE IN CURRENT MODE
LTC1922IG-1#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC1922IG-1#TRPBF DC to DC converter applications.
- Sensitive electronic devices
- Scientific research
- Access control systems
- Machining centers
- Flaw detection equipment
- Elevator lighting
- Automatic testing equipment
- Electrical power transmission
- Direct power supply system
- Smoke prevention equipment
