LTC1922IN-1#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2001 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO CONFIGURABLE IN CURRENT MODE |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 250 |
| Terminal Pitch | 2.54mm |
| Frequency | 1MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LTC1922 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 9.5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 100A |
| Voltage - Supply (Vcc/Vdd) | 3.8V~10.3V |
| Control Features | Ramp, Soft Start |
| Topology | Full-Bridge |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | Up to 1MHz |
| Control Technique | PHASE-SHIFT CONTROL |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PHASE-SHIFT |
| Duty Cycle (Max) | 99% |
| Height Seated (Max) | 3.937mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC1922IN-1#PBF Overview
This switching controller fits most application requirements since it is packaged in a 20-DIP (0.300, 7.62mm) package. For 1 outputs, the dc motor controller is appropriate. The pmic is packaged in Tube solid enclosure. It is capable of handling Transistor Driver dc switching's outputs (s). The supply and operating voltage of the dc control are 3.8V~10.3V. Qualified to work in a -40°C~85°C TA dc switcher. This switching controller can switch at Up to 1MHz. dc dc regulator can be generalized using Through Hole. Ramp, Soft Start is used for efficient switching control in the dcdc regulator. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. There are a DUAL terminal on the switching converters. There are many different types of terminations for 20. It includes PHASE-SHIFT CONTROL as one of the control techniques dc dc converter ic adapts. DC switcher's voltage input is 9.5V. Searching "LTC1922" will return other relevant dc to dc converter ics. There are only 20 pins on switching converter. Switching converter is a type of Switching Regulator or Controllers in particular. As determined by the test statistics, the output voltage of DC regulator is 5V. A starting point for a project is to note down the dc dc regulator's usual output current, which is 100A. Switching controller operates at 1MHz Hz. This value is ALSO CONFIGURABLE IN CURRENT MODE so that DC to DC voltage regulator better serves the purpose.
LTC1922IN-1#PBF Features
Transistor Driver Outputs
Switching Frequency: Up to 1MHz
Ramp, Soft Start
PHASE-SHIFT CONTROL
Frequency: 1MHz
ALSO CONFIGURABLE IN CURRENT MODE
LTC1922IN-1#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC1922IN-1#PBF DC to DC converter applications.
- Industrial controllers
- Boring machines
- Hydrogen power
- Electric heating, lighting
- Access control systems
- Radio equipment
- Elevator lighting
- Large fire protection systems
- Magnetohydrodynamic power
- Smart grid
