LTC1992-10HMS8#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 19kOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC1992 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Differential, Rail-to-Rail |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Operating Supply Current | 700μA |
| Slew Rate | 1.5V/μs |
| Amplifier Type | Differential |
| Common Mode Rejection Ratio | 55 dB |
| Current - Input Bias | 2pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~11V ±1.35V~5.5V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 250μV |
| Gain Bandwidth Product | 3.2MHz |
| Unity Gain BW-Nom | 4000 kHz |
| Voltage Gain | 80dB |
| Average Bias Current-Max (IIB) | 0.000002μA |
| Power Supply Rejection Ratio (PSRR) | 72dB |
| Nominal Gain Bandwidth Product | 4MHz |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC1992-10HMS8#PBF Overview
Op amp is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. Differential-type instrumentation amplifiers are used in this application. A Tube case is used to deliver the buffer op amp. It is estimated that there will be at least 8 terminations this year. There are a total of 8 pins on this op amp. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. Instrumentation amplifier is a part of Operational Amplifier. The buffer op amp includes 8 pins. With regard to input offset voltage, instrumentation amplifier is rated at 250μV. This electronic part is recommended for mounting type Surface Mount. With regard to operating temperature, op amp ranges -40°C~125°C. A supply current of 700μA can be used to operate this linear amplifier. There should be no change in the voltage gain at 80dB. One of the advantages of this op amp is that it outputs Differential, Rail-to-Rail signals, which is one of its many advantages. The op amp is rated for an operating supply voltage of 1. It is important to keep the resistance within the 19kOhm range of the linear amplifier.
LTC1992-10HMS8#PBF Features
8 Pins
supply voltage of 5V
80dB voltage gain
Output Type: Differential, Rail-to-Rail
Resistance of 19kOhm
LTC1992-10HMS8#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC1992-10HMS8#PBF Instrumentational OP Amps applications.
- Large motor controllers
- Comparator
- Test equipment
- E-book readers
- earphone
- Multimedia playback equipment
- Industrial control system
- Weak signal detection
- Video computer boards
- Portable docking station
